Bedienungsanleitung Bosch GOS 10.8 V-LI Professional (Seite 11 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592048

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

English | 11

Bosch Power Tools 1 609 92A 0B4 | (12.9.13)

Product Features

The numbering of the product features refers to the illustra-

tion of the inspection camera on the graphics page.

1 Hand unit

2 Increase-brightness button “+”

3 On/Off button

4 Reduce-brightness button “–”

5 Display

6 Camera cable

7 Camera head

8 Camera lens

9 Illumination light in camera head

10 Battery pack*

11 Battery unlocking button

12 Camera cable, extension*

13 Socket sleeve of camera connection

14 Camera connection

15 Magnet

16 Hook

17 Mirror

18 Video output socket

19 Video cable

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Assembly

 Before any work on the inspection camera itself (e.g.

assembling, maintenance, etc.) as well as when trans-

porting and storing, remove the battery from the in-

spection camera.

Battery Charging

 Use only the battery chargers listed on the graphics

page. Only these battery chargers are matched to the lith-

ium-ion battery used in your inspection camera.

Note: The battery is supplied partially charged. To ensure full

capacity of the battery, completely charge the battery in the

battery charger before using your power tool for the first time.

The lithium ion battery can be charged at any time without re-

ducing its service life. Interrupting the charging procedure

does not damage the battery.

The battery is equipped with a NTC temperature control

which allows charging only within a temperature range of be-

tween 0 °C and 45 °C. A long battery service life is achieved

in this manner.

Battery Charge-control Indication

When the inspection camera is switched on, the charge con-

dition of the battery is indicated on the display 5:

Removing the battery

To remove the battery 10, press the battery unlocking but-

tons 11 and pull the battery toward the rear out of the inspec-

tion camera. Do not exert any force when doing this.

Mounting the Camera Cable (see figure A)

For operation of the inspection camera, the camera cable 6

must be mounted to the hand unit 1.

Insert the camera cable 6 into the camera connection 14 in

such a manner that the pin of the camera cable engages into

the opening of the camera connection as shown in the figure.

Slide the socket sleeve 13 on the camera connection over the

camera cable and hand-tighten in clockwise direction.

To remove the camera cable 6, unscrew socket sleeve 13 in

anticlockwise direction and pull the camera cable off.

Mounting the Camera Cable Extension (Accessory)

To mount a camera cable extension 12, the mounted camera

cable 6 must be removed.

Then, mount the extension 12 onto camera connection 14 as

described under “Mounting the Camera Cable” and tighten.

If required, further extensions can be mounted in the same

manner. However, the image quality decreases when exceed-

ing a total length approx. 10 m (incl. camera cable).

Digital Inspection Camera GOS 10,8 V-LI

Article number

3 601 B41 000

Rated voltage

V= 10.8

Operating temperature

°C –20...+65

Storage temperature

(hand unit without battery)

°C –30...+80

Relative humidity

%5–95

Smallest bending radius of camera

cable

mm 120

Diameter of camera head

mm 17/9.5

Depth-of-field range of camera

lens mm 38 –∞

Display size

mm 68.6

Display resolution

320 x 240

Format of video output

NTSC

Operating life time, approx.

h/Ah 11.5

Weight according to

EPTA-Procedure 01/2003

kg 0.68

Dimensions

(length x width x height) mm 166 x 66 x 45

1) Free of moisture condensation

Indication Capacity

> 1/2

< 1/2

Reserve

OBJ_BUCH-1311-004.book Page 11 Thursday, September 12, 2013 1:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GOS 10.8 V-LI Professional Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info