Bedienungsanleitung Bosch GPB 18V-5 SC (Seite 19 von 243) (Alle Sprachen)

786240

Zoom out

Zoom in

Vorherige Seite

1/243

Nächste Seite

English | 19

If no DAB+ radio stations can be found,<No DAB Station–

Please Auto Scan> will appear on the multi-function

indicator(k).

Setting/Saving FM Radio Stations

To select the audio source FM radio stations, press the

source button(18) as many times as needed untilFM ap-

pears on the audio source indicator(h).

GPB18V‑5C: During adjustment, the radio frequency ap-

pears on the time indicator(j) and then on the radio fre-

quency indicator(a).

GPB18V-5SC: The frequency of each current station will

appear on the top line of the multi-function indicator(k). The

additional information shown on the bottom line of the multi-

function indicator can be set with the menu function.

If there is sufficiently good reception of a suitable signal, the

radio will automatically switch to stereo reception, and the

stereo indicator(e) will appear in the display.

– To set a specific station, turn the source button(18) un-

til the required frequency or the required station is shown

in the display.

– To search for the next station with high signal

strength, briefly press the seek button (scan down)(13)

or the seek button (scan up)(19). The next station found

is shown in the display and played back.

– To search for all stations with high signal strength,

press the seek button (scan down)(13) or the seek but-

ton (scan up)(19) for longer than 0.5s. Any station

found is played back for 5s, then the search is continued

until the end of the frequency band. To cancel the station

search, briefly press the seek button (scan down)(13) or

the seek button (scan up)(19).

– To save a set station, press the preset button(17) of the

required storage space until the number of the storage

space appears on the storage space indicator(c).

– To automatically search for and save the stations with

the best reception, press the seek button (scan

down)(13) and the seek button (scan up)(19) simultan-

eously. The radio will check all receivable stations and

save the four stations with the best reception in preset

spaces 1 to 4. Please note that stations that have already

been saved will be overwritten here where necessary.

Once the search has finished, the station saved in preset

space 1 will be played back.

– To start playback of a saved station, briefly press one of

the preset buttons(17). The number of the storage space

will appear on the storage space indicator(c).

Setting the Rod Antenna

The radio is supplied with a fitted rod antenna(30). For FM

radio operation, point the rod antenna in the direction that

enables the best reception.

If the reception is insufficient, position the radio at a differ-

ent location that enables better reception.

Note: When operating the radio in the direct vicinity of ra-

dio-communication equipment or radio transceivers, or

other electronic equipment, the radio reception can be sub-

ject to interference.

Connecting External Audio Sources via AUX

Disengage the locking lever(8) and open the cover(7) of

the media compartment. Insert the 3.5‑mm connector for

the AUX cable(9) into the AUXIN socket(10). Connect the

AUX cable to a suitable audio source.

To play back the AUX audio source, press the source

button(18) untilAUX appears on the audio source

indicator(h).

After removing the AUX cable connector, close the cover(7)

of the media compartment again and lock it to protect

against dirt.

If it fits, you can also place an audio source connected via

AUX in the storage compartment(6).

If one of the preset buttons(17) is pressed during AUX oper-

ation, the radio will switch to the station that was saved in

the last used radio operating mode.

Playing Back/Controlling External Audio Sources via

Bluetooth®

To play back an audio source (e.g. smartphone) via

Bluetooth®, either press the source button(18) until the

Bluetooth® indicator(g) appears in the display, or briefly

press the Bluetooth® button(21) regardless of the current

audio source.

If the radio has already been connected to an external audio

source via Bluetooth® and if this audio source is available, a

connection to this audio source will automatically be estab-

lished. As soon as the connection is established, the

Bluetooth® indicator(g) will light up continuously.

GPB18V‑5SC: The name of the device connected via

Bluetooth® is displayed on the top line of the multi-function

indicator(k). The text from the connected device appears

on the bottom line.

If a connection cannot be established within twominutes,

the connection set-up will be cancelled and the Bluetooth®

indicator(g) will flash continuously.

GPB18V‑5SC: <Not connected> will appear on the multi-

function indicator(k).

The radio will shut off automatically after another

17minutes without a connection being established.

Establishing a new Bluetooth® connection:

– To establish a connection to a new external audio source,

press the Bluetooth® (21) button for longer than

0.5seconds. This is also possible during a search pro-

cess, if there is an existing connection or when operating

with another audio source.

– The radio will start the search process. During the search

process, the Bluetooth® indicator(g) will flash.

– Activate the connection via the external audio source. For

smartphones, that is generally possible via the settings in

the Bluetooth® menu. The radio will appear as an avail-

able source under the name GPB18V-5Cxxxx or

GPB18V-5SCxxxx. Please observe the operating in-

structions for your audio source/smartphone.

– As soon as a connection is established via Bluetooth®, the

Bluetooth® indicator(g) will light up continuously.

Bosch Power Tools 1 609 92A 7T0 | (27.05.2022)

Bosch GPB 18V-5 SC Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info