Bedienungsanleitung Bosch GPO 14 CE Professional (Seite 15 von 201) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592509

Zoom out

Zoom in

Vorherige Seite

1/201

Nächste Seite

16 | English

1 609 92A 114 | (16.12.14) Bosch Power Tools

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

Leinfelden, 16.12.2014

Assembly

Mounting the Protective Devices

 Before any work on the machine itself, pull the mains

plug.

 Operate your machine only with the auxiliary handle 7

or bow handle 2.

Auxiliary Handle

Screw the auxiliary handle 7 on the right or left of the machine

head depending on the working method.

Bow Handle

Fasten the bow handle 2 to the gear case as shown in the fig-

ure.

Mounting the Grinding Tools

 Before any work on the machine itself, pull the mains

plug.

Clean the grinder spindle 6 and all parts to be mounted.

For clamping and loosening the grinding tools, lock the grind-

er spindle with the spindle lock button 3.

 Actuate the spindle lock button only when the grinder

spindle is at a standstill. Otherwise, the machine may be-

come damaged.

See graphics page for the mounting sequence.

Buffing Disc

Screw the clamping mandrel 8 firmly onto grinder spindle 6

and tighten it via the spanner surfaces with an open-end span-

ner.

Mount the clamping flange 9 and the buffing disc 10 onto the

clamping mandrel 8. Screw on the clamping nut 11 and tight-

en with the two-pin spanner.

Polishing Plate

Mount the two spacer discs 12 and the polishing plate 13 on-

to the spindle 6.

Screw on the round nut 14 and tighten with the two-pin span-

ner.

Pull the lamb’s wool bonnet 15 over the polishing plate 13

and tighten the attachment strings.

Polishing Sponge

Screw the polishing sponge 16 firmly onto the grinder spindle

6. The lambskin polishing bonnet 17 can be pulled over the

polishing sponge 16.

Rubber Sanding Plate

Place the rubber sanding plate 18 onto the grinder spindle 6.

Screw on the round nut 14 and tighten with the two-pin span-

ner.

Firmly press the sanding sheet 19 onto the bottom side of the

rubber sanding plate 18.

Felt Polishing Disc

Firmly screw the felt polishing disc 20 onto the grinder spin-

dle 6.

Cup Brush/Disc Brush

The cup brush/disc brush must be able to be screwed onto

the grinder spindle until it rests firmly against the grinder

spindle flange at the end of the grinder spindle threads. Tight-

en the cup brush/disc brush with an open-end spanner.

Approved Grinding Tools

All grinding tools mentioned in these operating instructions

can be used.

The permissible speed [min

-1

] or the circumferential speed

[m/s] of the grinding tools used must at least match the values

given in the table.

Therefore, observe the permissible rotational/circumferen-

tial speed on the label of the grinding tool.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

rials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

max.

[mm]

D b d [min

-1

] [m/s]

180 – – 3000 80

100 30 M 14 3000 45

OBJ_BUCH-1284-003.book Page 16 Tuesday, December 16, 2014 4:09 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GPO 14 CE Professional Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info