Bedienungsanleitung Bosch GSA 1100 E Professional (Seite 13 von 155) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

594590

Zoom out

Zoom in

Vorherige Seite

1/155

Nächste Seite

English | 13

Bosch Power Tools 1 609 92A 0B5 | (20.1.14)

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 93 dB(A); Sound power level

104 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

Cutting board: a

=18.5m/s

, K=1.5 m/s

Cutting wooden beam: a

=19.5m/s

, K=1.5 m/s

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardisation documents: EN 60745

according to the provisions of the directives 2009/125/EC

(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,

2006/42/EC.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Leinfelden, 28.08.2013

Assembly

Replacing/Inserting the Saw Blade

 Before any work on the machine itself, pull the mains

plug.

 When mounting the saw blade, wear protective gloves.

Danger of injury when touching the saw blade.

 When changing the saw blade, take care that the saw

blade holder is free of material residue, e. g. wood or

metal shavings.

Selecting a Saw Blade

An overview of recommended saw blades can be found at the

beginning of these operating instructions. Use only saw

blades with ½" universal shank. The saw blade should not be

longer than required for the intended cut.

Use a thin saw blade for narrow curve cuts.

Inserting the Saw Blade (see figure A)

Press the SDS clamping lever 5 forward and guide the saw

blade 1 behind the clamping plate 12 into the saw blade hold-

er 3. Release the SDS clamping lever 5.

 Check the tight seating by pulling on the saw blade. A

loose saw blade can fall out and cause injury.

For certain work, the saw blade 1 can also be turned through

180° (with the teeth pointed upwards) and re-inserted again.

Removing the Saw Blade

 Before removing, allow the saw blade to cool down.

Danger of injury when touching the hot saw blade.

Press the SDS clamping lever 5 forward and pull out the saw

blade 1. Release the SDS clamping lever 5.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Cutting depth, max.

– in wood

– in non-alloy steel

– Pipe diameter

230

150

Weight according to

EPTA-Procedure 01/2003

kg 3.6

Protection class

/II

Sabre saw GSA 1100 E

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

OBJ_BUCH-819-003.book Page 13 Monday, January 20, 2014 9:23 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSA 1100 E Professional Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info