Bedienungsanleitung Bosch GSA 900 E (Seite 16 von 208) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

110212

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

16 | English

1 609 929 N64 | (28.1.08) Bosch Power Tools

f Hold the power tool only by the insulated

gripping surfaces when performing an oper-

ation where the cutting tool may contact

hidden wiring or its own cord. Contact with

a “live” wire will also make exposed metal

parts of the power tool “live” and shock the

operator.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for sawing wood, plas-

tic, metal and building materials while resting

firmly on the workpiece. It is suitable for

straight and curved cuts. When using the appro-

priate bimetal saw blades, it is possible to cut

flush to the workpiece surface. The saw blade

recommendations must be observed.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Saw blade*

2 Adjustable footplate

3 SDS clamping lever for saw blade release

4 Clamping plate

5 Saw blade holder

6 Stroke rod

7 Rotating collar

8 Release button for the collar

9 Utility hook

10 On/Off switch

11 Soft grip

*The accessories illustrated or described are not in-

cluded as standard delivery.

Technical Data

Sabre saw GSA 900 E

Professional

Article number

3 601 F4C 0..

Rated power input

W 900

Stroke rate at no load n

spm 0 – 2700

Tool holder

SDS

Stroke rate control

Stroke

mm 28

Cutting capacity, max.

–in wood

– in non-alloy steel

– Pipe diameter

250

130

Weight according to

EPTA-Procedure

01/2003

kg 3.3

Protection class

/II

The values given are valid for nominal voltages [U] of

230/240 V. For lower voltage and models for specific

countries, these values can vary.

Please observe the article number on the type plate of

your machine. The trade names of the individual ma-

chines may vary.

OBJ_BUCH-68-003.book Page 16 Monday, January 28, 2008 11:32 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSA 900 E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info