10
2 609 931 904 • TMS • 05.10.99
Impact Drill GSB 13 GSB 13 RE GSB 13 RE
Part number 0 601 131 0.. 0 601 131 6.. 0 601 131 7..
Rated power 550 W 550 W 550 W
Output power 280 W 280 W 280 W
No-load speed 2600 RPM 0–2600 RPM 0–2600 RPM
Impact rate max. 42000/min max. 42000/min max. 42000/min
Drill spindle locking button – – •
Speed selection – • •
Right/Left rotation – • •
Gear rim chuck • • –
Drill chuck clamping range max. 13 mm max. 13 mm max. 13 mm
Drilling output:
- Steel max. 10 mm max. 10 mm max. 10 mm
- Wood max. 20 mm max. 20 mm max. 20 mm
- Concrete max. 13 mm max. 13 mm max. 13 mm
Weight approx. 1.5 kg approx. 1.5 kg approx. 1.5 kg
Safety class / II / II / II
1 Quick clamping chuck
2 Spindle lock
3 “Drilling/Impact drilling” selector switch
4 Ventilation slots
5 Depth stop
6 Auxiliary handle
7 Winged screw for auxiliary handle
adjustment
8 Reversing switch
9 Speed selector thumbwheel
10 On/Off switch
11 Locking button for on/off switch
12 Drill chuck key
13 Ring gear drill chuck
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
The A-weighted noise levels of the machine are
typically: Sound pressure level: 97 dB (A); sound
power level: 110 dB (A).
Wear hearing protection!
The weighted acceleration is typically 17 m/s
2
.
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are
strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be fol-
lowed. Before using for the first
time, ask for a practical demon-
stration.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Be careful of hidden electrical lines
or gas and water pipes. Check the
working area, e. g., with a metal de-
tector.
For long hair, wear hair protection.
Work only with close-fitting clothes.
■ Connect machines that are used in the open via
a fault current (FI) circuit breaker with a trigger-
ing current of 30 mA maximum. Use only exten-
sion cables that are intended for outdoor use.
■ For all work with the machine, the auxiliary
handle 6 must be mounted and used.
Product Specification
GB
Machine Elements
Noise/Vibration Information
For Your Safety
