Bedienungsanleitung Bosch GSM 200 Professional (Seite 17 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592523

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

18 | English

1 609 929 V05 | (9.3.10) Bosch Power Tools

Assembly

f Before any work on the machine itself, pull

the mains plug.

Bolt the machine to a workbench/bench top

with suitable screws via the 4 holes intended for

this.

Mounting the Spark Guard/Workpiece

Support (see figures A

–D)

f Use the machine only with the spark guard

9. Sparks being expelled can injure your eyes

or set objects in the vicinity on fire.

Mount the holder for the spark guard 8 with the

two screws.

Screw the spark guard 9 to the holder of the

spark guard 8.

Mount the workpiece support 10 as shown in

the figure.

f Regularly check the clearance between the

workpiece support 10 as well as the holder

of the spark guard 8 to the grinding wheel,

and readjust as required. The clearance to

the grinding wheel may not exceed 2 mm.

When the clearance is larger, you are not suf-

ficiently protected against sparking. The

workpiece can be drawn in by the rotational

motion of the grinding wheel and lead to in-

juries.

Replace the grinding wheel when the holder of

the spark guard 8 can no longer be adjusted to

the required clearance of 2 mm (max.) to the

grinding wheel.

Power supply (GSM 200 D)

(Three-Phase Current)

f Have the power tool connected to the

mains supply only through a qualified elec-

trician. The machine is provided without a

mains plug. When connecting, pay attention

to the correct rotation direction of the power

tool.

Changing a Grinding Wheel

f The rated speed of the accessory must be at

least equal to the maximum speed marked

on the power tool. Accessories running fast-

er than their rated speed can break and fly

apart.

Replace the grinding wheel as soon as its resid-

ual material reaches a thickness of 10 mm.

Loosen the 3 screws of cover 1 and remove cov-

er 1. Hold the grinder spindle 5 in place with an

open-end spanner (size 7 mm) and unscrew

clamping nut 2.

Note: The grinder spindle 5 on the left side of

the machine has a left-hand thread.

Remove the clamping flange 3 and the grinding

wheel 5 from the grinder spindle.

The new grinding wheel is mounted in reverse

order. Place the cover 1 firmly onto the housing

and tighten with the 3 screws.

Dress used and out-of-centre grinding discs

with a whetstone (accessory) before continuing

to use them.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

OBJ_BUCH-1114-001.book Page 18 Tuesday, March 9, 2010 1:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSM 200 Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info