Bedienungsanleitung Bosch gsr 10 8 v-li (Seite 18 von 95) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381171

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

18 | English

1 609 929 T09 | (12.11.09) Bosch Power Tools

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Note: Use of batteries not suitable for the ma-

chine can lead to malfunctions of or cause dam-

age to the power tool.

Set the rotational direction switch 4 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 7 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure C)

The rotational direction switch 4 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 5 actuated.

Right rotation: For driving in screws, push the

rotational direction switch 4 left to the stop.

Left Rotation: For loosening or unscrewing

screws, push the rotational direction switch 4

right to the stop.

Setting the Torque

With the torque presetting ring 3 the required

torque setting can be preselected in 10 steps.

With the correct setting, the insert tool is

stopped as soon as the screw is screwed flush

into the material or when the adjusted torque is

reached. The safety clutch is deactivated in the

“ ” position, e. g. for drilling.

Select a higher setting or switch to the

“ ” symbol when unscrewing screws.

Switching On and Off

To start the machine, press the On/Off switch 5

and keep it pressed.

The power light 8 lights up when the On/Off

switch 5 is slightly or completely pressed, and

allows the work area to be illuminated when

lighting conditions are insufficient.

To switch off the machine, release the On/Off

switch 5.

Adjusting the Speed

The speed of the switched on power tool can be

variably adjusted, depending on how far the

On/Off switch 5 is pressed.

Light pressure on the On/Off switch 5 results in

a low rotational speed. Further pressure on the

switch results in an increase in speed.

Fully automatic spindle locking (Auto-lock)

When the On/Off switch 5 is not pressed, the

drill spindle and thus the tool holder are locked.

This enables screws to be screwed in, even

when the battery is empty and allows for the

machine to be used as a screwdriver.

Temperature Dependent Overload Protection

When using as intended for, the power tool can-

not be subject to overload. When the load is too

high or the allowable battery temperature range

of 0–70 °C is exceeded, the speed is reduced.

The power tool will not run at full speed until

reaching the allowable battery temperature.

Working Advice

f Apply the power tool to the screw only

when it is switched off. Rotating tool inserts

can slip off.

Before screwing larger, longer screws into hard

materials, it is advisable to predrill a pilot hole

with the core diameter of the thread to approx.

of the screw length.

Craftsman Case (see figures D–E)

The craftsman case 12 can hold the power tool,

the respective battery charger, a spare battery

and additional accessories. The craftsman case

12 can be hung up with the utility clip 11.

The carrying holster 10 for the cordless screw-

driver is fastened in the case with a Velcro strap

and can easily be removed. The loop of the car-

rying holster, e. g., can be fastened to a belt.

OBJ_BUCH-1081-001.book Page 18 Thursday, November 12, 2009 2:06 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gsr 10 8 v-li Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info