Bedienungsanleitung Bosch GSR 12V-15 FC (Seite 14 von 225) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708149

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

14 | English

Service

u Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

u Never service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.

Safety information for drills and screwdrivers

u Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

u Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting ac-

cessory or fasteners may contact hidden wiring. Cut-

ting accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the op-

erator an electric shock.

u Switch the power tool off immediately if the applica-

tion tool becomes blocked. Be prepared for high

torque reactions which cause kickback. The applica-

tion tool becomes blocked when it becomes jammed in

the workpiece or when the power tool becomes over-

loaded.

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

u Use suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

u Always wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

u In case of damage and improper use of the battery, va-

pours may be emitted. Ensure the area is well-ventilated

and seek medical attention should you experience any ad-

verse effects. The vapours may irritate the respiratory

system.

u Do not open the battery. There is a risk of short-circuit-

ing.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g.

against continuous intense sunlight, fire,

water and moisture. There is a risk of explo-

sion.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for driving and loosening screws

and for drilling in wood, metal and plastic.

The power tool can be used with an angle adapter (GFA12-

W), off-set angle adapter (GFA12-E), bit holder adapter

(GFA12-X) or drill chuck adapter (GFA12-B).

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Tool holder

(2)

Torque presetting ring

(3)

Gear selector switch

(4)

Battery release button (2x)

(5)

Battery

(6)

Rotational direction switch

(7)

On/off switch

(8)

Battery charge indicator

(9)

Worklight

(10)

Bit holder adapter GFA 12-X

(11)

Drill chuck adapter GFA 12-B

(12)

Off-set angle adapter GFA 12-E

(13)

Angle adapter GFA 12-W

(14)

Locking ring

(15)

Handle (insulated gripping surface)

(16)

Universal bit holder

Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical data

Cordless drill/driver GSR 12V-15 FC GFA 12-X GFA 12-B GFA 12-E GFA 12-W

Article number

3 601 JF6 0..

– – – –

Rated voltage V = 10.8/12 – – – –

No-load speed

1 609 92A 4A7 | (11.10.2018) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSR 12V-15 FC Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info