Bedienungsanleitung Bosch GSR 14 4 V (Seite 17 von 113) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473683

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

English | 17

Bosch Power Tools 1 609 929 S97 | (22.10.09)

f Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

f Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

ies.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for driving in and loos-

ening screws as well as for drilling in wood, met-

al, ceramic and plastic.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Keyless chuck

2 Torque preselection ring

3 Gear selector

4 Screwdriver bit*

5 Battery unlocking button

6 Battery*

7 Rotational direction switch

8 On/Off switch

9 Handle (insulated gripping surface)

10 Universal bit holder*

11 Securing screw for keyless chuck

12 Allen Key**

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

**Commercially available (not included in the deliv-

ery scope)

Noise/Vibration Information

Measured sound values determined according

to EN 60745.

Typically the A-weighted sound pressure level of

the product is less than 70 dB(A). Uncertainty

K=3dB.

The noise level when working can exceed

80 dB(A).

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Drilling into metal: Vibration emission value

<2.5 m/s

, Uncertainty K =1 m/s

Screwdriving: Vibration emission value

<2.5 m/s

, Uncertainty K =1 m/s

OBJ_BUCH-208-003.book Page 17 Thursday, October 22, 2009 2:13 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSR 14 4 V Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info