Bedienungsanleitung Bosch GSR 18 V-LI (Seite 18 von 258) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78576

Zoom out

Zoom in

Vorherige Seite

1/258

Nächste Seite

18 | English

2 609 932 657 | (6.11.08) Bosch Power Tools

f Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Avoid unintentional switching on. Ensure

the On/Off switch is in the off position be-

fore inserting battery pack. Carrying the

power tool with your finger on the On/Off

switch or inserting the battery pack into

power tools that have the switch on invites

accidents.

f Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

also against continuous sun irradia-

tion and fire. There is danger of explo-

sion.

f In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

f When the battery is defective, liquid can es-

cape and come into contact with adjacent

components. Check any parts concerned.

Clean such parts or replace them, if required.

f Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

load.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for driving in and loos-

ening screws as well as for drilling in wood, met-

al, ceramic and plastic.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Keyless chuck

2 Torque presetting ring

3 Gear selector

4 Screwdriver bit*

5 Battery unlocking button

6 Battery

7 Rotational direction switch

8 On/Off switch

9 Universal bit holder*

10 Securing screw for keyless chuck

11 Allen key*

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

OBJ_BUCH-565-004.book Page 18 Thursday, November 6, 2008 12:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSR 18 V-LI Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info