Bedienungsanleitung Bosch GSR 18V-90 C (Seite 21 von 283) (Alle Sprachen)

786159

Zoom out

Zoom in

Vorherige Seite

1/283

Nächste Seite

English | 21

When the LED(15) lights up green, the tool has returned to

within the permitted operating temperature range.

User Interface (seefigureD)

The user interface(9) is used to activate and deactivate the

precision clutch and for the "KickBack Control" rapid shut-

off, as well as for the status indicator of the power tool.

Precision Clutch

The precision clutch stops overlocking

when the set torque is reached, thereby re-

ducing clutch wear and the resulting noise.

The precision clutch can be deactivated on the

user interface(9) with the precision clutch button(19). The

current status is shown via the LED for precision clutch(20)

on the user interface(9).

Rapid Shut-off (KickBack Control)

The rapid shut-off function (KickBack Con-

trol) gives the user greater control over the

power tool and offers them better protec-

tion than power tools that do not have Kick-

Back Control. The power tool will switch off if it suddenly

and unforeseeably rotates around the drilling axis.

The rapid shut-off is indicated by the LED(15) flashing red,

flashing from the worklight(18) and the LED of the KickBack

Control(16) lighting up red on the power tool.

To switch the tool back on, release the on/off switch and

then press it again.

uIt will no longer be possible to switch the power tool

on if the KickBack Control function is faulty. Have the

power tool serviced by a qualified repair person using

only original replacement parts.

The rapid shut-off function can be deactivated on the user

interface(9) with the KickBack Control button(17). If the

power tool is not used for longer than 5 minutes or if the re-

chargeable battery is removed, the rapid shut-off function

automatically switches back on. The current status is shown

via the KickBack Control LED(16) on the user interface(9).

uNote: The warning light of the LEDs is not visible from

all directions! The warning light is difficult to see in

bright sunlight.

Status Indications

Status indicator for

power tool Meaning/cause Solution

Green Status OK –

Yellow Critical temperature has been reached, re-

chargeable battery is almost empty, or KickBack

Control is switched off

Run the power tool at no load and allow it to cool

down, replace or charge the rechargeable battery

soon, or press the KickBack Control button

Illuminated red Power tool has overheated or rechargeable bat-

tery is empty Allow the power tool to cool down, or replace or

charge the rechargeable battery

Flashing red Rapid shut-off is triggered Switch the power tool off and on again

Flashing blue Power tool is connected to a mobile device or

settings are being transferred –

Connectivity functions

In conjunction with the Bluetooth® Low Energy Module

GCY42, the following connectivity functions are available

for the power tool:

– Registration and personalisation

– Status check, output of warning messages

– General information

– Management

– Switching the worklight on and off

– Setting the worklight brightness and afterglow duration

– Setting the brightness and backlight duration of the user

interface

Read the corresponding operating instructions for informa-

tion about the Bluetooth® Low Energy ModuleGCY42.

Practical advice

uThe power tool with inserted Bluetooth® Low Energy

ModuleGCY42 (accessory) is equipped with a radio

interface. Local operating restrictions, e.g. in aircraft

or hospitals, must be observed.

uOnly apply the power tool to the screw when the tool

is switched off. Rotating application tools can slip off.

Belt clip

You can use the belt clip (6) to hang the power tool on a belt,

for example. You then have both hands free and the power

tool is always at hand.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

Bosch Power Tools 1 609 92A 6GU | (23.06.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSR 18V-90 C Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info