Bedienungsanleitung Bosch GSR 6-45 TE Professional (Seite 13 von 138) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591845

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

English | 13

Bosch Power Tools 2 609 932 926 | (11.3.15)

Operation

Starting Operation

 Observe correct mains voltage! The voltage of the pow-

er source must agree with the voltage specified on the

nameplate of the machine. Power tools marked with

230 V can also be operated with 220 V.

To save energy, only switch the power tool on when using it.

Reversing the rotational direction

The rotational direction switch 8 is used to reverse the rota-

tional direction of the machine. However, this is not possible

with the On/Off switch 7 actuated.

Right rotation: For driving in screws, push the rotational di-

rection switch 8 left to the stop.

Left rotation: Push the rotational direction switch 8 right to

the stop (for unscrewing screws).

Switching On and Off

To start the machine, press the On/Off switch 7 and keep it

pressed.

To lock the pressed On/Off switch 7, press the lock-on button

To switch off the machine, release the On/Off switch 7 or

when it is locked with the lock-on button 6, briefly press the

On/Off switch 7 and then release it.

Adjusting the Speed

The speed of the switched-on power tool can be variably ad-

justed, depending on how far the On/Off switch 7 is pressed.

Light pressure on the On/Off switch 7 results in a low rotation-

al speed. Further pressure on the switch results in an increase

in speed.

Adjusting the Screw-in Depth (see figure B)

With the adjustment sleeve 3, the screw-in depth of the screw

head into the workpiece can be preset in 8 locking steps per

full turn. Each step corresponds with a 0.25 mm change of

the screw-in depth.

Turning the adjustment sleeve 3 in clockwise direction results

in a greater screw-in depth; turning in anticlockwise direction

reduces the screw-in depth.

The required setting is best determined by testing.

Working Advice

 Before any work on the machine itself, pull the mains

plug.

 Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

Guide the screw toward the screwdriving bit 1. The screw is

held in place by the magnet pull of the universal bit holder 10.

Firmly push the tip of the screw into the material to be

screwed until the screwing-depth stop 4 faces against the

workpiece.

Switch the machine on. The screw is screwed into the materi-

al until the adjusted screw-in depth is reached. The drive is

disengaged and the tool holder no longer rotates. Check the

screw-in depth and readjust, if required.

For unscrewing screws, set the rotational direction switch 8

to left rotation and pull off the screwing-depth stop 4 toward

the front without turning the adjustment sleeve.

Working with the screwing-depth stop 4 is also possible when

adapting the screw-in depth.

Belt Clip

With the belt clip 5, the machine can be hung onto a belt. The

user has both hands free and the machine is always at hand.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains

plug.

 For safe and proper working, always keep the machine

and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

the machine.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

OBJ_BUCH-137-008.book Page 13 Wednesday, March 11, 2015 10:42 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSR 6-45 TE Professional Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info