Bedienungsanleitung Bosch GSS 230 AVE Professional (Seite 14 von 176) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592638

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

14 | English

2 609 932 911 | (3.12.13) Bosch Power Tools

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardization documents: EN 60745

according to the provisions of the directives 2011/65/EU,

2004/108/EC, 2006/42/EC.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

01.10.2013

Assembly

 Before any work on the machine itself, pull the mains

plug.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suita-

ble for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Integrated Dust Extraction with Dust Box

(see figures I –M)

Mount the dust box 7 onto the extraction outlet 22. Turn the

dust box in such a manner that its recesses face against the

tips on the extraction outlet and the dust box can be felt to en-

gage.

The filling level of the dust box 7 can easily be checked

through the transparent container.

To empty the dust box 7, pull it off toward the rear with a slight

twisting motion.

Screw the filter element 6 on and pull it out of the dust box 7.

Empty the dust box.

To loosen the dust, gently strike or tap the filter element 6

against a firm surface. Clean the lamellas of the filter element

6 with a soft brush.

Note: To ensure optimum dust extraction, empty the dust box

7 in good time and clean the filter element 6 at regular inter-

vals.

When working vertical surfaces, hold the power tool in such a

manner that the dust box 7 faces downward.

External Dust Extraction (see figure N)

Mount a vacuum hose 23 onto the extraction outlet 22. Mount

the vacuum hose onto the extraction outlet (as shown in the

figure) in such a manner that the lateral openings on the ex-

traction outlet remain free. This prevents the power tool from

adhering to the workpiece during sanding and the surface

quality of the workpiece from being impaired.

Connect the vacuum hose 23 to a vacuum cleaner (accesso-

ry). An overview for connecting to various vacuum cleaners

can be found at the end of this manual.

The vacuum cleaner must be suitable for the material being

worked.

When vacuuming dry dust that is especially detrimental to

health or carcinogenic, use a special vacuum cleaner.

When working vertical surfaces, hold the power tool in such a

manner that the vacuum hose faces downward.

Replacing the Sanding Sheet

When attaching a new sanding sheet, remove any dust or de-

bris from the sanding plate 10 (e. g. with a brush).

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

Sanding Sheets with Velcro Backing (see figure E)

The sanding plate 10 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 14, free the Velcro back-

ing of the sanding plate 10 from any debris by tapping against

it in order to enable optimum adhesion.

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

OBJ_BUCH-1665-002.book Page 14 Tuesday, December 3, 2013 1:12 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSS 230 AVE Professional Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info