Bedienungsanleitung Bosch GTB 185-Li (Seite 15 von 195) (Alle Sprachen)

786152

Zoom out

Zoom in

Vorherige Seite

1/195

Nächste Seite

English | 15

PowerSAVE mode (see figureC)

To activate PowerSAVE mode, briefly press the

PowerSAVE on/off button(9). The(11)

PowerSAVE LED indicator will light up. Then

briefly press the on/off switch(12) and lock it

in place by pressing the lock-on button(6).

The motor remains deactivated/disconnected, even if the

on/off switch(12) is pressed. Now push the power tool

gently into the workpiece to activate the motor.

The PowerSAVE LED indicator(11) will go out if the power

tool is unused for 30minutes. To activate PowerSAVE mode

again, disengage the lock by briefly pressing the on/off

switch(12). Then press the on/off switch(12) again and

lock it in place with the lock-on button(6). The PowerSAVE

LED indicator(11) will light up again.

Reversible depth stop (seefigureD)

To loosen or unscrew screws, line up the ar-

rows on the adjusting sleeve (3) and on the

gearbox of the power tool so that they are op-

posite one another. Pull the adjusting sleeve

(3) backwards until it audibly clicks into place

on the gearbox without any gaps. The screwdriver bit(1) is

now clearly visible. The power tool is ready to loosen or un-

screw screws.

Slide the rotational direction switch (5) on the left-hand side

of the power tool backwards (i.e. away from the front of the

power tool). The rotational direction switch (5) on the right-

hand side of the power tool automatically slides forwards.

Switch on the power tool.

Note: Screws can also be loosened by removing the revers-

ible depth stop(4) completely.

The reversible depth stop(4) cannot be pulled back when

the adjusting sleeve(3) is in or above the MAX position.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be over-

loaded. In the event of heaving loading or the temperature

rising/falling outside the permitted battery temperature

range, the speed will be reduced. The power tool will not run

at full speed again until the permitted battery temperature

has been reached.

Protection against deep discharge

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

Practical advice

Belt clip

You can use the belt clip (15) to hang the power tool on a

belt, for example. You then have both hands free and the

power tool is always at hand.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The contained lithium-ion batteries are subject to the Dan-

gerous Goods Legislation requirements. The batteries are

suitable for road-transport by the user without further re-

strictions.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Dispatch battery packs only when the housing is undam-

aged. Tape or mask off open contacts and pack up the bat-

tery in such a manner that it cannot move around in the

packaging. Please also observe the possibility of more de-

tailed national regulations.

Bosch Power Tools 1 609 92A 6HJ | (23.09.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GTB 185-Li Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info