English - 1
1 Battery
2 Battery unlocking button
3 On/Off switch
4 Auxiliary handle
5 Tool holder, SDS-pro
6 Protection guard
7 Clamping lever
8 Grinding-/cutting disc*
9 Rubber sanding pad*
10 Sanding disc*
11 Centring collar
12 Cam
13 Locking fixtures
14 SDS-pro release button
* Not all of the accessories illustrated or described are
included as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Wear protective glasses and hear-
ing protection.
■ Wear additional protection equipment for your
safety, such as protective gloves, sturdy
shoes, hard hat and apron.
■ Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
■ Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
■ Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
■ Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, remove the
battery. Otherwise danger of injury is given
when unintentionally actuating the On/Off
switch.
■ Ensure the switch is in the off position be-
fore inserting battery pack. Inserting the bat-
tery pack into power tools that have the switch
on invites accidents.
■ Convince yourself before using that the battery
is securely seated in the machine.
■ Do not strain the machine so heavily that it
comes to a standstill.
■ For all work with the machine, the auxiliary
handle must be mounted.
■ When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
■ Always switch the machine off and wait until it
has come to a standstill before placing it down.
■ For work with grinding or cutting discs, the pro-
tection guard 6 must be mounted.
■ Do not work with materials containing asbes-
tos.
■ Use only grinding tools with a permissible
speed at least as high as the no-load speed of
the machine.
■ Check grinding tools before using them. The
grinding tool must be mounted properly and
able to move freely. Carry out a trial run with-
out load for at least 30 seconds. Do not use
damaged, out-of-centre or heavily vibrating
grinding tools.
■ Protect the grinding tool from impact, shock
and grease.
Tool Specifications
Angle Grinder GWS 14,4 V
PROFESSIONAL
Article number 0 601 934 4..
No-load speed [rpm] 12 500
Grinding disc dia.,
max.
[mm] 100
Tool holder SDS-pro
Weight according
to EPTA-Procedure
01/2003
[kg] 2.1
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Machine Elements
For Your Safety
12 • 1 609 929 C83 • 04.08
