Bedienungsanleitung Bosch GWS 14-125 CIE (Seite 29 von 199) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79069

Zoom out

Zoom in

Vorherige Seite

1/199

Nächste Seite

30 | English

1 609 929 L00 | (25.7.08) Bosch Power Tools

The vibration emission level given in this infor-

mation sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another.

It may be used for a preliminary assessment of

exposure.

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 98/37/EC (until 28 Dec 2009),

2006/42/EC (from 29 Dec 2009).

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

30.06.2008, Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Assembly

Mounting the Protective Devices

f Before any work on the machine itself, pull

the mains plug.

Protection Guard for Grinding

Place the protection guard

12 onto the spindle collar

as shown in the illustra-

tion. The triangle marks on

the protection guard must

correspond with the re-

spective marks on the gear

case.

Press the protection guard

12 onto the spindle collar

until the shoulder of the

protection guard is seated

against the flange of the

machine, and turn the protection guard until it

can clearly be heard to engage.

Adjust the position of the protection guard 12 to

the requirements of the work process. For this,

press the release lever 1 upward and turn the

protection guard 12 to the required position.

f Adjust the protection guard 12 in such a

manner that sparking is prevented in the di-

rection of the operator.

f The protection guard 12 may be turned only

upon actuation of the release lever 1! Oth-

erwise the power tool may not continue to

be used under any circumstances and must

be taken to an after-sales service agent.

Note: The encoding keys on the protection

guard 12 ensure that only a protection guard

that fits the machine type can be mounted.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-340-002.book Page 30 Friday, July 25, 2008 9:21 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 14-125 CIE Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch GWS 14-125 CIE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info