Bedienungsanleitung Bosch gws 1400 professional (Seite 19 von 301) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

391343

Zoom out

Zoom in

Vorherige Seite

1/301

Nächste Seite

20 | English 1 609 929 K94 • 20.12.06

f When wheel is binding or when interrupting

a cut for any reason, switch off the power

tool and hold the power tool motionless

until the wheel comes to a complete stop.

Never attempt to remove the cut-off wheel

from the cut while the wheel is in motion,

otherwise kickback may occur. Investigate and

take corrective action to eliminate the cause of

wheel binding.

f Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed

and carefully reenter the cut. The wheel may

bind, walk up or kickback if the power tool is

restarted in the workpiece.

f Support panels or any oversized workpiece

to minimize the risk of wheel pinching and

kickback. Large workpieces tend to sag under

their own weight. Supports must be placed under

the workpiece near the line of cut and near the

edge of the workpiece on both sides of the wheel.

f Use extra caution when making a “pocket

cut” into existing walls or other blind areas.

The protruding wheel may cut gas or water pipes,

electrical wiring or objects that can cause kick-

back.

Safety warnings specific for sanding

operations

f When sanding, do not use excessively over-

sized sanding disc paper. Follow manufac-

turers recommendations, when selecting

sanding paper. Larger sanding paper extending

beyond the sanding pad presents a laceration haz-

ard and may cause snagging, tearing of the disc,

or kickback.

Safety warnings specific for wire

brushing operations

f Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive

load to the brush. The wire bristles can easily

penetrate light clothing and/or skin.

f If the use of a guard is recommended for

wire brushing, do not allow any interference

of the wire wheel or brush with the guard.

Wire wheel or brush may expand in diameter due

to work load and centrifugal forces.

Additional safety warnings

Wear safety goggles.

f Use suitable detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explosion.

Penetrating a water line causes property damage

or may cause an electric shock.

f Always use the protective devices specified

for the respective applicational case. Protec-

tive devices not suitable for the applicational case

cannot cover off the grinding tool sufficiently.

f When working stone, use dust extraction.

The vacuum cleaner must be approved for

the extraction of stone dust. Using this equip-

ment reduces dust-related hazards.

f Use a cutting guide when cutting stone. With-

out sideward guidance, the cutting disc can jam

and cause kickback.

f When working with the machine, always

hold it firmly with both hands and provide for

a secure stance. The power tool is guided more

secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

f Take protective measures when dust can

develop during working that is harmful to

one’s health, combustible or explosive.

Example: Some dusts are regarded as carcino-

genic. Wear a dust mask and work with dust/chip

extraction when connectable.

f Keep your workplace clean. Blends of materi-

als are particularly dangerous. Dust from light

alloys can burn or explode.

f Never use the machine with a damaged

cable. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables increase

the risk of an electric shock.

Functional Description

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

While reading the operating instructions, unfold the

graphics page for the machine and leave it open.

OBJ_BUCH-310-001.book Page 20 Wednesday, December 20, 2006 9:31 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gws 1400 professional Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info