Bedienungsanleitung Bosch GWS 18-125 PL (Seite 24 von 364) (Alle Sprachen)

786325

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

English | 25

Bosch Power Tools 1 609 92A 3ZX | (7.11.17)

Switching On and Off

To save energy, only switch the power tool on when using it.

To start the power tool, press the On/Off switch 4 forward

and then down.

To lock-on the pressed On/Off switch 4, push the On/Off

switch 4 further forward.

To switch off the power tool, release the On/Off switch 4, or

when it is locked, briefly press the On/Off switch 4 and then

release it.

Switch Version without Lock-on (country-specific):

To start the power tool, press the On/Off switch 4 forward

and then down.

To switch off the machine, release the On/Off switch 4.

Check grinding tools before using. The grinding tool

must be mounted properly and be able to move freely.

Carry out a test run for at least one minute with no load.

Do not use damaged, out-of-centre or vibrating grind-

ing tools. Damaged grinding tools can burst and cause in-

juries.

Kickback stop

In case of a sudden drop in speed, e.g.,

caused by a jammed disc while cutting, the

power supply to the motor is electronically

interrupted.

To restart the operation, switch the On/Off switch 4 to the

Off position and start the machine again.

Restarting Protection

The restarting protection feature prevents uncontrolled re-

starting of the machine after an interruption in the power sup-

ply.

To restart the operation, switch the On/Off switch 4 to the

Off position and start the machine again.

Reduced starting current

The electronic reduced starting current limits the power con-

sumption when switching the tool on and enables operation

from a 13 ampere fuse.

Note: When the machine runs with full speed after switching

on, the reduced starting current, the restarting protection

and the kickback stop features have failed. The power tool

must promptly be sent to an after-sales service agent for

maintenance. For addresses, see Section „After-sales Service

and Application Service“.

Constant Electronic Control

Constant electronic control holds the speed constant at no-

load and under load, and ensures uniform working perfor-

mance.

Speed preselection (GWS 18-125 SL/GWS 18-125 SPL)

The required speed can be preselected with the thumbwheel 3 (also while running).

The data in the following table are recommended values.

The values specified for speed levels are guide values.

The rated speed of the accessory must be at least equal

to the maximum speed marked on the power tool. Ac-

cessories running faster than their rated speed can break

and fly apart.

Working Advice

Exercise caution when cutting slots in structural walls;

see Section “Information on Structures”.

Clamp the workpiece if it does not remain stationary

due to its own weight.

Do not strain the machine so heavily that it comes to a

standstill.

After heavily straining the power tool, continue to run

it at no-load for several minutes to cool down the acces-

sory.

Do not touch grinding and cutting discs before they

have cooled down. The discs can become very hot while

working.

Do not use the power tool with a cut-off stand.

Material Application Accessory Thumbwheel 3

Metal Removing paint Sanding disc 2 – 3

Wood, metal Brushing, rust removal Cup brush, sanding disc 3

Metal, masonry Grinding Grinding disc 4 – 6

Metal Rough grinding Grinding disc 6

Masonry, stone Cutting Cutting disc and cutting guide

(Cutting masonry/stone is permitted only with use of

the cutting guide)

Metal Cutting Cutting disc 6

Speed prese-

lection level GWS 18-125 ...

[min-1]

GWS 18-150 ...

[min-1]

12800 2800

24500 4100

36300 5400

48200 6700

59800 8000

612000 10000

OBJ_BUCH-3330-001.book Page 25 Tuesday, November 7, 2017 2:23 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 18-125 PL Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info