Bedienungsanleitung Bosch GWS 20-230 JH Professional (Seite 17 von 284) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592069

Zoom out

Zoom in

Vorherige Seite

1/284

Nächste Seite

18 | English

1 609 92A 0MJ | (23.4.14) Bosch Power Tools

Safety warnings specific for wire brushing operations

 Be aware that wire bristles are thrown by the brush

even during ordinary operation. Do not overstress the

wires by applying excessive load to the brush. The wire

bristles can easily penetrate light clothing and/or skin.

 If the use of a guard is recommended for wire brushing,

do not allow any interference of the wire wheel or

brush with the guard. Wire wheel or brush may expand in

diameter due to work load and centrifugal forces.

Additional safety warnings

Wear safety goggles.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 Release the On/Off switch and set it to the off position

when the power supply is interrupted, e. g., in case of a

power failure or when the mains plug is pulled. This pre-

vents uncontrolled restarting.

 Do not touch grinding and cutting discs before they

have cooled down. The discs can become very hot while

working.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for cutting, roughing and brushing of

metal and stone materials without the use of water.

For cutting with bonded abrasives, a special cutting guard

(accessory) must be used.

When cutting in stone, provide for sufficient dust extraction.

With approved sanding tools, the machine can be used for

sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Spindle lock button

2 On/Off switch

3 Auxiliary handle (insulated gripping surface)

4 Grinder spindle

5 Protection guard for grinding

6 Locking screw for protection guard

7 Mounting flange with O-ring

8 Grinding wheel*

9 Clamping nut

10 Two-pin spanner for clamping nut*

11 Quick-clamping nut *

12 Carbide grinding head*

13 Protection guard for cutting*

14 Cutting disc*

15 Protection guard for grinding cup*

16 Grinding cup*

17 Two-pin spanner, offset, for grinding cup*

18 Hand guard*

19 Spacer discs*

20 Rubber sanding plate*

21 Sanding sheet*

22 Round nut*

23 Cup brush*

24 Cutting guide with dust extraction protection guard *

25 Diamond cutting disc*

26 Handle (insulated gripping surface)

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Angle Grinder

GWS ...

20-230

Article number

3 601 ...

... H50 L.. ... H50 M..

Rated power input

W2000 2000

Output power

W1250 1250

The values given are valid for a nominal voltage [U] of 230V. For differ-

ent voltages and models for specific countries, these values can vary.

Only for power tools without reduced starting current: Starting cycles

generate brief voltage drops. Interference with other equipment/ma-

chines may occur in case of unfavourable mains system conditions. Mal-

functions are not to be expected for system impedances below

0.25 ohm.

OBJ_BUCH-1686-003.book Page 18 Wednesday, April 23, 2014 3:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 20-230 JH Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info