Bedienungsanleitung Bosch GWS 2000 23J (Seite 15 von 122) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

473694

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

English - 2

1 609 929 B76 • TMS • 30.11.00

Working safely with this ma-

chine is possible only when the

operating and safety information

are read completely and the in-

structions contained therein are

strictly followed. In addition, the

general safety instructions in the

enclosed booklet must be fol-

lowed. Before using for the first

time, ask for a practical demon-

stration.

If the mains cable is damaged or

cut through while working, do not

touch the cable but immediately

pull the mains plug. Never use the

machine with a damaged cable.

Wear protective glasses and ear

protection.

The dust that is produced while

working can be detrimental to

health, inflammable or explosive.

Suitable safety measures are re-

quired.

Examples: Some dusts are re-

garded as carcinogenic. Use suita-

ble dust-/chip extraction and wear a

dust mask.

Dust from light alloys can burn or

explode. Always keep the work

place clean, as blends of materials

are particularly dangerous.

Wear protective gloves and sturdy

shoes.

When necessary, also wear an

apron.

■ Never allow children to use the machine.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Always direct the cable to the rear away from

the machine.

■ Connect machines that are used in the open

via a residual current device (RCD) with an ac-

tuating current of 30 mA maximum. Use only

extension cables that are approved for outdoor

use.

■ Always switch off the machine and allow to

come to a stop before placing it down.

■ Insert the mains plug only when the machine is

switched off.

■ For mains failure or when the main plug is

pulled, unlock the On/Off switch immediately

and turn it to the off position. This prevents un-

controlled restarting.

■ The machine must be used only for dry cut-

ting/grinding.

■ For all work with the machine, the auxiliary

handle 4 must be mounted.

■ For work with roughing or cutting discs, the

protective guard 5 must be mounted. For work

with the rubber sanding plate 19 or with the

cup brush 22/disc brush/flap disc, mounting

the hand protector 17 (optional extra) is rec-

ommended.

■ Use a vacuum cleaner for drawing off the dust

when working with stone and wear a dust

mask. The vacuum cleaner must be approved

for masonry dust. When cutting stone, use the

cutting guide.

■ Do not work with materials containing asbes-

tos.

■ Use only grinding tools with a permissible

speed at least as high as the no-load speed of

the machine.

■ Check grinding tools before use. The grinding

tool must be properly mounted and turn freely.

Perform a test run for at least 30 seconds with-

out load. Do not use damaged, out-of-round or

vibrating grinding tools.

■ Protect the grinding tool from impact, shock

and grease.

■ Apply the machine to the workpiece only when

switched on.

■ Keep hands away from rotating grinding tools.

■ Pay attention to the direction of rotation. Al-

ways hold the machine so that sparks and

grinding dust fly away from the body.

For Your Safety

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 2000 23J Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info