Bedienungsanleitung Bosch GWS 24-180 P (Seite 21 von 325) (Alle Sprachen)

786337

Zoom out

Zoom in

Vorherige Seite

1/325

Nächste Seite

English | 21

GWS 24-180 GWS 24-230 GWS 24-180 P GWS 24-230 P

K m/s21.5 1.5 1.5 1.5

Disc sanding:

m/s2

< 2.5

1.5

< 2.5

1.5

< 2.5

1.5

< 2.5

1.5

GWS 24-180 JZ GWS 24-230 JZ GWS 24-230 PZ

3601HC23.. 3601HC33.. 3601HC34..

Noise emission values determined according toEN60745-2-3.

Typically, the A-weighted noise level of the power tool is

Sound pressure level

Sound power level

UncertaintyK

Wear hearing protection!

dB(A)

105

Vibration total values ah (triax vector sum) and uncertaintyK determined according toEN60745-2-3:

Surface grinding:

m/s2

6.5

1.5

6.5

1.5

6.5

1.5

Disc sanding:

m/s2

3.0

1.5

3.0

1.5

3.0

1.5

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Fitting

Fitting Protective Equipment

uPull the plug out of the socket before carrying out any

work on the power tool.

Note: If the grinding disc breaks during operation or the

holding fixtures on the protective guard/power tool become

damaged, the power tool must be sent to the after-sales ser-

vice immediately; see the "After-Sales Service and Applica-

tion Service" section for addresses.

Protective guard for grinding

Place the protective guard (6) on the spindle collar. Adjust

the position of the protective guard (6) to the requirements

of the operation and lock the protective guard (6) with the

locking screw (7).

uAdjust the protective guard (6) such that sparking in

the direction of the operator is prevented.

Protective guard for cutting

uAlways use the protective guard for cutting (14) when

cutting with bonded abrasives.

uProvide sufficient dust extraction when cutting stone.

The protective guard for cutting (14) is fitted in the same

way as the protective guard for grinding (6).

Extraction guard for cutting with a guide block

The extraction guard for cutting with a guide block (22) is fit-

ted in the same way as the protective guard for grinding (6).

Side handle

uDo not operate your power tool without the side

handle (4).

Screw the side handle (4) on the left or right of the machine

head depending on how your are working.

Bosch Power Tools 1 609 92A 5TE | (29.07.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 24-180 P Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info