Bedienungsanleitung Bosch GWS 9-125 S (Seite 20 von 303) (Alle Sprachen)

786322

Zoom out

Zoom in

Vorherige Seite

1/303

Nächste Seite

20 | English

Low-vibration auxiliary handle

The low-vibration auxiliary

handle reduces vibration,

enabling the tool to be used

safely and more comfort-

ably.

uDo not make any alterations of any kind to the auxili-

ary handle.

Do not continue to use a damaged auxiliary handle.

Hand guard

uAlways fit the hand guard (16) when working with the

rubber sanding plate (17) or with the cup brush/disc

brush/flap disc.

Attach the hand guard (16) to the side handle (4).

Fitting the Abrasive Tools

uPull the plug out of the socket before carrying out any

work on the power tool.

uDo not touch grinding and cutting discs until they have

cooled down. The discs can become very hot while work-

ing.

Clean the grinding spindle (6) and all the parts to be fitted.

Lock the grinding spindle with the spindle lock button (1)

before clamping and releasing the abrasive tools.

uDo not press the spindle lock button while the grind-

ing spindle is moving. The power tool may become dam-

aged if you do this.

Grinding/cutting disc

Pay attention to the dimensions of the abrasive tools. The

diameter of the hole must match that of the mounting flange.

Do not use an adapter or reducer.

When using diamond cutting discs, ensure that the arrow in-

dicating the direction of rotation on the diamond cutting disc

matches the direction of rotation of the power tool (see the

direction of rotation arrow on the machine head).

See the graphics page for assembly instructions.

To fasten the grinding/cutting disc, screw on the clamping

nut(11) and tighten with the combination wrench(5); see

section (see " Quick-clamping nut ",

page20).

uAfter fitting the abrasive tool, check that the abrasive

tool is fitted correctly and can turn freely before

switching on the power tool. Make sure that the abras-

ive tool does not brush against the protective guard or

other parts.

Mounting flange for grinding spindle M 14:

A plastic part (O-ring) is fitted around the cent-

ring collar in the mounting flange (9). If the O-

ring is missing or damaged, the mounting

flange (9) must be replaced before operation

can resume.

Flap disc

uAlways fit the hand guard (16) when working with the

flap disc.

Rubber sanding pad

uAlways fit the hand guard (16) when working with the

rubber sanding pad (17).

See the graphics page for fitting instructions.

Screw on the round nut (19) and tighten with the combina-

tion wrench (5).

Cup brush/disc brush

uAlways fit the hand guard (16) when working with the

cup brush or disc brush.

See the graphics page for fitting instructions.

The cup brush/disc brush must be screwed onto the grinding

spindle until it rests firmly against the grinding spindle flange

at the end of the grinding spindle thread. Tighten the cup

brush/disc brush with an open-ended spanner.

Quick-clamping nut

To change the abrasive tool easily without having to use any

additional tools, you can use the quick-clamping nut (12) in-

stead of the clamping nut (11).

uThe quick-clamping nut (12) may be used only for

grinding or cutting discs.

Only use quick-clamping nuts (12) that are in good work-

ing order and not damaged.

When screwing on, make sure that the printed side of the

quick-clamping nut (12) is not facing the grinding disc;

the arrow must be pointing towards the index mark (22).

(22)

Press the spindle lock but-

ton (1) to lock the grinding

spindle. To tighten the

quick-clamping nut, turn

the grinding disc firmly

clockwise.

If the quick-clamping nut

has been attached correctly

and is not damaged, you

can loosen it by hand by

turning the knurled ring an-

ticlockwise. Never loosen a

tight quick-clamping nut

with pliers. Always use

the combination wrench.

Insert the combination

wrench as shown in the fig-

ure.

Approved abrasive tools

You can use all the abrasive tools mentioned in these operat-

ing instructions.

1 609 92A 6KB | (25.06.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 9-125 S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info