Bedienungsanleitung Bosch GWX 18V-15 C (Seite 26 von 421) (Alle Sprachen)

786200

Zoom out

Zoom in

Vorherige Seite

1/421

Nächste Seite

26 | English

Approved abrasive tools

You can use all the abrasive tools mentioned in these operat-

ing instructions.

The permissible speed [min-1] or the circumferential speed

[m/s] of the abrasive tools used must at least match the val-

ues given in the table.

It is therefore important to observe the permissible rota-

tional/circumferential speed on the label of the abrasive

tool.

max. [mm] [mm]

D b d [min-1] [m/s]

125 7 – 11,000 80

125 – – 11,000 80

75 30 – 11,000 45

82 – – 11,000 80

Rotating the machine head (GWX 18V-15 C)

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

The machine head can be

rotated in 90° increments.

In this way, the on/off

switch can be brought into

a more favourable handling

position for particular ap-

plications, e.g. for left-

handed tool users.

Completely unscrew the

four screws. Rotate the ma-

chine head carefully, without removing it from the hous-

ing, into the new position. Screw in and retighten the four

screws.

Dust/Chip Extraction

Dust from materials such as lead-containing coatings, some

wood types, minerals and metal can be harmful to one’s

health. Touching or breathing-in the dust can cause allergic

reactions and/or lead to respiratory infections of the user or

bystanders.

Certain dust, such as oak or beech dust, is considered carci-

nogenic, especially in connection with wood-treatment ad-

ditives (chromate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the ma-

terials to be worked.

uAvoid dust accumulation at the workplace. Dust can

easily ignite.

Operation

Start-up

Inserting the battery

Push the charged battery (7) into the base of the power tool

from the front until the battery is securely locked.

Switching on/off

To start the power tool, push the on/off switch (5) forward.

To lock the on/off switch (5) in position, push the on/off

switch (5) forward and down until it clicks into place.

To switch off the power tool, release the on/off switch (5);

or, if the switch is locked, briefly push the on/off switch (5)

backward and down and then release it.

uAlways check abrasive tools before using them. The

abrasive tool must be fitted properly and be able to

move freely. Carry out a test run for at least one

minute with no load. Do not use abrasive tools that are

damaged, run untrue or vibrate during use. Damaged

abrasive tools can burst apart and cause injuries.

Kickback stop

If there is a sudden kickback in the power tool,

e.g. jamming in a separating cut, the power

supply to the motor will be interrupted elec-

tronically. The kickback stop indicator(25)

then lights up. When kickback stop is activ-

ated, the status indicator (29) flashes red.

To restart the tool, set the on/off switch (5) to the off posi-

tion and then switch the power tool on again.

Restart protection

The restart protection feature prevents the power tool from

starting unintentionally after the power supply to it has been

interrupted.

When restart protection is activated, the status indicator

(29) flashes red.

To restart the tool, set the on/off switch (5) to the off posi-

tion and then switch the power tool on again.

Impact shutdown

The integrated impact shutdown switches the power tool off

as soon as it hits the floor. The status indicator (29) then

flashes red.

To restart the tool, set the on/off switch (5) to the off posi-

tion and then switch the power tool on again.

1 609 92A 6PN | (21.06.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWX 18V-15 C Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info