Bedienungsanleitung Bosch GWX 9-115 (Seite 19 von 311) (Alle Sprachen)

786301

Zoom out

Zoom in

Vorherige Seite

1/311

Nächste Seite

English | 19

Angle grinder GWX 9-115 GWX 9-115 S GWX 9-125 S GWX 9-125

Power output W 450 450 450 450

Rated speed min-1 11,000 11,000 11,000 11,000

Speed adjustment range min-1 11,000 2800–11,000 2800–11,000 11,000

Max. grinding disc diameter mm 115 115 125 125

Speed preselection – ● ● –

Restart protection – ● ● –

Weight according to EPTA-Procedure 01:2014

– with low-vibration auxiliary

handle kg 2.1 2.1 2.1 2.1

– with standard auxiliary handle kg 2.0 2.0 2.0 2.0

Protection class / II / II / II / II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to

EN60745-2-3.

Typically the A-weighted noise level of the power tool are: 93

dB(A); sound power level 104 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN60745-2-3:

Surface grinding (roughing):

ah=6.5m/s2, K=1.5m/s2,

Disc sanding:

ah=6.0m/s2, K=1.5m/s2.

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Fitting

Fitting Protective Equipment

uPull the plug out of the socket before carrying out any

work on the power tool.

Note: If the grinding disc breaks during operation or the

holding fixtures on the protective guard/power tool become

damaged, the power tool must be sent to the after-sales ser-

vice immediately; see the "After-Sales Service and Applica-

tion Service" section for addresses.

Protective guard for grinding

Place the protective guard

(7) onto the holder on the

power tool until the coding

cams of the protective guard

are aligned with the holder.

When doing so, press and

hold the unlocking lever (1).

Press the protective guard

(7) onto the spindle collar un-

til the shoulder of the pro-

tective guard is sitting on the

flange of the power tool and

rotate the protective guard

until it audibly clicks into

place.

Adjust the position of the protective guard (7) to meet the

requirements of the operation. To do this, push the unlock-

ing lever (1) upward and rotate the protective guard (7) into

the required position.

uAlways position the protective guard(7) such that the

two cams on the unlocking lever(1) engage in the

corresponding openings on the protective guard(7).

uAdjust the protective guard (7) such that sparking in

the direction of the operator is prevented.

uThe protective guard (7) must only be adjustable

while the unlocking lever (1) is actuated. Otherwise,

the power tool must not be used any more under any

circumstances and must be sent to the after-sales ser-

vice.

Note: The coding cams on the protective guard (7) ensure

that only a protective guard that is suitable for the power

tool can be fitted.

Bosch Power Tools 1 609 92A 6KC | (21.05.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWX 9-115 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info