Bedienungsanleitung Bosch HBC36D754 (Seite 9 von 36) (Englisch)

459270

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Before using the appliance for the first time

In this section you will find out which steps are required before

using the appliance for the first time:

■ Setting the clock and language

■ Setting the water hardness range

■ Starting the appliance for the first time

■ Cleaning the accessories before use

■ Fitting the grease filter

Setting the clock and language

After making the electrical connection, “Set the clock” appears

in the display. Set the clock and the language for the display, if

required.

1. Set the current time using the rotary selector.

2. Press the X button to switch to “Select language”.

3. Set the required language using the rotary selector.

30 different languages are available.

4. Press the 0 button.

The time and language are applied. The current time is

displayed.

Setting the water hardness range

Caution!

The appliance may become damaged due to the use of

unsuitable liquids.

Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

Only use cold, fresh tap water, softened water or uncarbonated

mineral water.

The water hardness "medium" is the default setting. Change the

value if your water is softer or harder.

You can check the water hardness with the test strips supplied

or ask your water supplier.

Notes

■ If your water is very hard, we recommend that you use

softened water.

■ If you use only softened water, you can set your appliance to

the "softened" water hardness range.

■ If you use mineral water, set the water hardness to hard.

■ If you use mineral water, you must only use non-carbonated

mineral water (see section "Filling and emptying the water

tank").

You can change the water hardness range in the basic settings

when the appliance is switched off.

1. If required, press the % button to switch off the appliance.

2. Press and hold the ° button until "Select language" appears in

the display.

3. Press the X button until "water hardness" appears.

"2-medium" is highlighted in the display.

4. Use the temperature selector to set the water hardness.

5. Press and hold the °button.

Your setting is saved.

Before first use

Before first use, heat the empty appliance for 20 minutes at

100 °C with the Steam type of heating. Do not open the

appliance door during this time. The appliance is automatically

calibrated (see section: Automatic calibration).

1. Press the % button to switch on the appliance.

The "Hot air" type of heating appears after approx.

4seconds.

2. Fill the water tank and insert it (see section: Filling the

water tank).

Before using for the first time, moisten the tank cover seal

with a little water.

3. Turn the rotary selector until "Steam" appears.

Cooking container, solid, GN

Y, 40 mm

deep

HEZ36D153

Cooking container, perforated, GN

40 mm deep

HEZ36D153G

Porcelain cooking container, solid, GN

HEZ36D353P

Porcelain cooking container, solid, GN

HEZ36D153P

Grease filter HEZ36DF

Wire rack HEZ36DR4

Roasting set HEZ36DB4

Cleaning sponge 643 254

Descaler 311 138

Honeycomb microfibre cloth 460 770

Accessories Order no.



2EHU8QWHUKLW]H

&



8KU]HLWHLQVWHOOHQ

PLWVFKOLHHQ

8KU]HLW



Water hardness

softened -

1-soft I

2-medium II

3-hard III

4very hard IV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBC36D754 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBC36D754

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info