Bedienungsanleitung Bosch HBC36D754 (Seite 25 von 36) (Englisch)

459270

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Replacing the cooking compartment bulb

Heat-resistant 230 V/25 W halogen bulbs with seals are

available from the after-sales service. Please specify the E

number and FD number of your appliance.

: Risk of burns!

Allow the cooking compartment and cooking compartment light

to cool before changing the bulb.

Always use a dry cloth to remove a new halogen bulb from the

packaging, otherwise it will not last as long.

1. Switch off the fuse in the fuse box or unplug at the mains.

2. Turn the cover anti-clockwise to remove.

3. Remove the bulb and replace with a bulb of the same type.

4. Slide the new seals and the clamping ring onto the glass

cover in the right order.

The appliance cannot be started, the dis-

play shows

"Cleaning system"

"Continue operation with

"Clean"

The cleaning aid has been cancelled

Press the

n button. Then rinse the appli-

ance twice (see section: Cleaning aid. Pro-

ceed as described under "Emptying the

evaporator dish and wiping out the appli-

ance")

"Clock" appears in the display Power cut Reset the clock

(see section: Time-setting options)

The appliance is not in operation. A cook-

ing time is shown in the display.

The rotary selector was accidentally oper-

ated

Press the

% button

The

n button was not pressed after mak-

ing the setting

Press the n button or delete the setting

with the

% button

"Automatic switch-off" appears in the dis-

play

The Automatic switch-off is active. Press any button.

"Fill water tank" appears even though the

water tank is full

The water tank has not been pushed in

properly

Slide in the water tank until it engages

The detection system is not working Call the after-sales service

"Fill water tank" appears even though the

water tank is not yet empty, or "Fill water

tank" does not appear even though the

water tank is empty

The water tank is dirty. The mobile water

level indicators are jammed

Shake and clean the water tank. If the

parts cannot be released, obtain a new

water tank from the after-sales service

The water tank empties for no discernible

reason. The evaporator dish is overflowing

The water tank was not closed properly Close the lid until you feel it engage

The tank lid seal is dirty Clean the seal

The seal in the tank cover is defective Obtain a new water tank from the after-

sales service

Liquid in the evaporator dish has fully

evaporated, even though the water tank is

full.

The water tank has not been pushed in

properly

Slide in the water tank until it engages

The feed line is blocked Descale the appliance. Check whether the

water hardness range is set correctly

"Empty tank/clean?" appears in the display The appliance has not been used for at

least two days and the water tank is full

Empty and clean the water tank. Always

empty the water tank after cooking

There is a "pop" noise during cooking Cold/warm effect with frozen food, caused

by the steam.

This is normal

When you cook with steam, a lot of steam

is created

The appliance is being automatically cali-

brated

This is normal

When cooking with steam, a lot of steam is

produced repeatedly

The appliance is unable to calibrate itself

automatically if cooking times are too

short

Restore the appliance to the factory set-

ting (see section: Basic settings). Then

start steaming at 100 °C for 20 minutes

Steam escapes from the ventilation slots

during cooking

This is normal

The appliance is not producing steam

properly

Limescale has formed in the appliance Start the descaling programme.

Error message "E011" appears in the dis-

play

A button was pressed for too long or is

jammed

Press the

0 button to delete the error

message Press all of the buttons individu-

ally and check whether they are clean

An error message "E..." appears in the dis-

play

Technical fault.

Press the

0 button to delete the error

message. Reset the clock if required.

If the error message appears again, call

the after-sales service

The appliance is not heating. "Demo" is

shown in the display

A button combination was actuated Disconnect the power supply and recon-

nect after 10 seconds. Within 2 minutes,

press the

D button for 4 seconds

Problem Possible cause Notes/remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBC36D754 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBC36D754

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info