Bedienungsanleitung Bosch HBG634BS1B (Seite 17 von 44) (Englisch)

745985

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Time-setting options

4. Press the l Start/Stop button to start.

The cooking time counts down on the display.

The appliance begins to heat up.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating. The cooking time

00 m 00 s is shown on the display.

You can set another cooking time using the s field, or

continue the operation without a cooking time using the

l Start/Stop button.

When your dish is ready, switch the appliance off using

the ÿ On/Off button.

Changing and cancelling

To change the cooking time, touch the s field. The

cooking time is highlighted white and can be changed

using the rotary selector. Use the s field to accept the

change.

If you want to cancel the cooking time, reset the

cooking time to zero. After the change has been

applied, you can continue the operation without a

cooking time using the l Start/Stop button.

Setting the end time

You can delay the time that the cooking time ends. You

can, for example, put your dish in the cooking

compartment in the morning and set the cooking time

so that it is ready at lunch time.

Notes

■ Ensure that food is not left in the cooking

compartment for too long as it may spoil.

■ Do not adjust the end time once the operation has

started. The cooking result would no longer be

satisfactory.

Applying settings

The end of the cooking time can be delayed by a

maximum of 23 hours and 59 minutes.

Example in the picture: The set cooking time is 45

minutes and the dish should be ready at 12:00.

1. Set the type of heating and temperature or level.

2. Set the cooking time.

3. Before starting, touch the s field again once.

The end time is highlighted white in the display.

4. Set a later end time using the rotary selector.

The value is applied after a few seconds, or touch

the s field again. The end time is shown in the

display under the operating mode and temperature

or level.

5. Press the l Start/Stop button to start.

The time at which the appliance will start is shown in

the display.

The appliance is in standby mode. When the appliance

starts, the cooking time counts down on the display.

Once the cooking time has elapsed, an audible signal

sounds. The appliance stops heating. The cooking time

00 m 00 s is shown on the display.

You can set another cooking time using the s field, or

continue the operation without a cooking time using the

l Start/Stop button.

When your dish is ready, switch the appliance off using

the ÿ On/Off button.

Changing and cancelling

To change the end time, interrupt the operation using

the l Start/Stop button and then touch the s field

twice. The end time is highlighted white and can be

changed using the rotary selector. Continue the

operation using the l Start/Stop button.

If you want to cancel the end time, reset the end time to

zero. You can start the set cooking time immediately

using the l Start/Stop button.

Note: The end time can only be changed if the cooking

time has not elapsed. Otherwise the cooking result

would no longer be satisfactory.



P







&

VWDU

VWRS











)

(QG

&RRNWLPH



6WDUW

Childproof lock en

Setting the timer

The timer runs alongside other settings. You can set it

at any time, even if the appliance is switched off. It has

its own audible signal so that you can tell whether it is

the timer or a cooking time which has elapsed.

Adjusting settings

The timer duration always starts at zero minutes.

The higher the value, the greater the time steps when

setting the timer.

The maximum setting is 24 hours.

1. Touch the t field.

The symbol lights up red. On the display, the timer

duration is shown in white and in focus.

2. Set the timer duration using the rotary selector.

3. Press the t field to start.

Note: After a few seconds, the timer also starts

automatically.

The timer duration counts down.

The timer remains visible on the display if the appliance

is switched off. When an operation is running, the

settings for this operation are shown in the foreground.

When you touch the t field, the timer duration is

displayed for a few seconds.

When the timer duration comes to an end, an audible

signal sounds and a note appears on the display. The

symbol is no longer lit up.

Tip: If the set timer duration relates to the appliance

operation, use the cooking time. The time is visible in

the foreground and the appliance switches off

automatically.

Changing and cancelling

To change the timer duration, touch the t field. The

timer duration is displayed in white and in focus, and

can be changed by using the rotary selector.

If you want to cancel the timer, reset the timer duration

to zero. Once the change has been applied, the symbol

is no longer lit up.

AChildproof lock

Chi l dpr oof l oc k

Your appliance is equipped with a childproof lock so

that children cannot switch it on accidentally or change

any settings.

The control panel is locked and no settings can be

made. The appliance can only be switched off using the

ÿ On/Off button.

Activating and deactivating

You can activate and deactivate the childproof lock

when the appliance is switched on or off.

In each case, press the D field for approx. 4 seconds.

A confirmation note appears on the display.

The D field lights up red when the appliance is

switched on. The D field does not light up when the

appliance is switched off.

Bosch HBG634BS1B Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info