Bedienungsanleitung Bosch HBM56B551 (Seite 17 von 36) (Englisch)

551196

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong type of cleaning agent, observe the information in the

table. Do not use

■ harsh or abrasive cleaning agents,

■ cleaning agents with a high concentration of alcohol,

■ hard scouring pads or sponges,

■ high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Cleaning self-cleaning surfaces in the cooking compartment

The back wall, ceiling and side walls of both cooking

compartments are coated with a highly porous ceramic layer.

This coating absorbs and dispels splashes from baking and

roasting while the oven is in operation. The higher the

temperature and the longer the oven is in operation the better

the result will be.

Never treat the self-cleaning surfaces with oven cleaner.

If the self-cleaning surfaces in the oven no longer clean

themselves adequately, they can be regenerated with the

cleaning system. For more information, please see

the Cleaning system section.

Slight discolouration of the coating does not affect

selfcleaning.

Caution!

Damage to surfaces on self-cleaning areas due to applying

oven cleaner.Never clean the self-cleaning surfaces with oven

cleaner.

If oven cleaner accidentally gets onto self-cleaning surfaces,

remove it immediately with a sponge and plenty of water.

Caution!

Damage to surfaces on self-cleaning areas due to the use of

abrasive and acidic cleaning agents and aids.

Do not use cleaning agents containing abrasive substances or

acids.

Do not use abrasive cleaning aids such as steel wool or

scourers.

Cleaning the cooking compartment floor

Use a dish cloth and hot soapy water or a vinegar solution.

If there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Detaching the rails

1. Lift up the front of the rail

2. and unhook it (figure A).

3. Then pull the whole rail forward

4. and remove it (Fig. B).

Clean the rails with cleaning agent and a sponge. For stubborn

deposits of dirt, use a brush.

Area Cleaning agents

Oven front Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Do not use glass cleaners or glass

scrapers.

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Remove traces of limescale, grease,

starch and albumin (e.g. egg white) immedi-

ately. Corrosion can form under such resi-

dues.

Special stainless steel cleaning products

suitable for hot surfaces are available from

our after-sales service or from specialist

retailers. Apply a very thin layer of the

cleaning product with a soft cloth.

Door panels Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Glass cover for

the oven light

Hot soapy water:

Clean with a dish cloth.

Seal

Do not remove.

Hot soapy water:

Clean with a dish cloth. Do not scour.

Rails Hot soapy water:

Soak and clean with a dish cloth or brush.

Telescopic

shelves

Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-

out rails are pulled out – it is best to clean

them when they are inserted. Do not soak

or clean in the dishwasher.

Accessories Hot soapy water:

Soak and clean with a dish cloth or brush.









Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBM56B551 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBM56B551

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info