Bedienungsanleitung Bosch HBS534BS0B (Seite 16 von 36) (Englisch)

745990

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Cleaning

--------

Notes

■ Slight differences in colour on the front of the

appliance are caused by the use of different

materials, such as glass, plastic and metal.

■ Shadows on the door panels, which look like

streaks, are caused by reflections made by the

interior lighting.

■ Enamel is baked on at very high temperatures.This

can cause some slight colour variation. This is

normal and does not affect operation.

The edges of thin trays cannot be completely

enamelled. As a result, these edges can be rough.

This does not impair the anti-corrosion protection.

Surfaces in the cooking compartment

The back wall in the cooking compartment is self-

cleaning.You can tell this from the rough surface.

The base, ceiling and side panel are enamelled and

have smooth surfaces.

Cleaning enamel surfaces

Clean the smooth enamel surfaces with a dish cloth

and hot soapy water or a vinegar solution. Then dry

them with a soft cloth.

Soften baked-on food remnants with a damp cloth and

soapy water. Use stainless steel wire wool or oven

cleaner to remove stubborn dirt.

Caution!

Never use oven cleaner in the cooking compartment

when it is still warm. This may damage the enamel.

Remove all food remnants from the cooking

compartment and the appliance door before you next

heat up the appliance.

Leave the cooking compartment open to dry after

cleaning it.

Note: Food residues can cause white deposits to form.

These are harmless and do not affect how the

appliance works. You can remove these residues using

lemon juice if required.

Cleaning self-cleaning surfaces

The self-cleaning surfaces are coated with a porous,

matte ceramic layer. This coating absorbs and dispels

splashes from baking and roasting while the appliance

is in operation.

If the self-cleaning surfaces no longer clean themselves

sufficiently and dark stains appear, they can be cleaned

using targeted heating.

Making settings

Remove the rails, pull-out shelves, accessories and

ovenware from the cooking compartment beforehand.

Thoroughly clean the smooth enamel surfaces in the

cooking compartment, the inside of the appliance door

and the glass cover on the interior lighting.

1. Set the 3D hot air type of heating.

2. Set the maximum temperature.

3. Start the mode and leave it to run for at least one

hour.

The ceramic coating is regenerated.

When the cooking compartment has cooled down,

remove the brown or white residue with water and a soft

sponge.

Note: During operation, reddish spots form on the

surfaces. This is not rust, but residues from food. These

spots are not harmful and do not restrict the cleaning

ability of the self-cleaning surfaces.

Caution!

Do not use oven cleaner on the self-cleaning surfaces.

This will damage the surfaces.If oven cleaner does get

onto these surfaces, dab it off immediately using water

and a sponge cloth. Do not rub the surface and do not

use abrasive cleaning aids.

Door panels Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use a glass scraper or a stainless steel

scouring pad.

Door handle Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

If descaler comes into contact with the door han-

dle, wipe it off immediately. Otherwise, any stains

will not be able to be removed.

Appliance interior

Enamel surfaces

and self-cleaning

surfaces

Observe the instructions for the surfaces of the

cooking compartment that follow the table.

Glass cover for

the interior light-

ing

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

If the cooking compartment is heavily soiled, use

oven cleaner.

Door seal

Do not remove.

Hot soapy water:

Clean with a dish cloth.

Do not scour.

Door cover made from stainless steel:

Use stainless steel cleaner. Follow the manufac-

turers' instructions. Do not use stainless steel

care products.

made from plastic:

Clean using hot soapy water and a dish cloth. Dry

with a soft cloth. Do not use glass cleaner or a

glass scraper.

Remove the door cover for cleaning.

Rails Hot soapy water:

Soak and clean with a dish cloth or brush.

Pull-out system Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-out rails

are pulled out – it is best to clean them when they

are pushed in. Do not clean in the dishwasher.

Accessories Hot soapy water:

Soak and clean with a dish cloth or brush.

If there are heavy deposits of dirt, use a stainless

steel scouring pad.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBS534BS0B Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info