Bedienungsanleitung Bosch HBS573BB0B (Seite 14 von 32) (Englisch)

773195

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

en Childproof lock

10.3 Preparing food for the programme

Use fresh and, ideally, chilled food.

1. Weigh the food.

The weight of the food is required in order to cor-

rectly set the programme.

2. Add the food to the cookware.

3. Place the cookware onto the wire rack.

Always place the cookware into the cooking com-

partment while it is cold.

10.4 Setting a programme

The appliance selects the optimal type of heating, tem-

perature and cooking time. All you need to do is set

the weight.

Notes

¡You can set the weight only in the intended area.

¡After the programme starts, you can no longer

change the programme and the weight.

1. Use the function selector to set Programme ⁠.

2. The temperature selector must remain in the "Off"

position ⁠.

3. Use the or button to set the required pro-

gramme.

4. Press the button.

5. Use the or button to set the weight of your

food. Always set the next higher weight.

‒The display shows the calculated cooking time.

The cooking time cannot be changed.

‒For some programmes, the button can be

used to delay the end.

→"Setting the end time", Page12

‒To change the programme, press the button.

aAfter a few seconds, the programme starts and the

cooking time counts down.

aIf the programme has ended, an audible signal

sounds and the display shows the cooking time as

zero.

6. When the programme ends:

‒Press any button to end the audible signal pre-

maturely.

‒To set a cooking time for further cooking, press

the button. The appliance continues to heat

using the programme settings.

‒When your food is ready, switch off the appli-

ance.

11 Childproof lock

You can secure your appliance to prevent children

from accidentally switching it on or changing the set-

tings.

Note:You can go to the basic settings →Page14 to

specify whether you want the option to set the child-

proof lock.

11.1 Activating and deactivating the

childproof lock

Requirement:The function selector must be set to the

"Off" position ⁠.

▶To activate the childproof lock, press and hold the

button until appears in the display.

‒To deactivate the childproof lock, press and hold

the button until goes out in the display.

12 Basic settings

You can configure the basic settings for your appliance to meet your needs.

12.1 Overview of the basic settings

Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features

of your appliance.

Display Basic setting Selection

Signal duration upon completion of a time or

timer period

= 10 seconds

= 30 seconds1

= 2 minutes

⁠ ⁠ Waiting time until a setting is applied = 3 seconds1

= 6 seconds

= 10 seconds

⁠ ⁠ Button tone when pressing a button = off

= on1

⁠ Brightness of the display illumination = dark

= medium1

= bright

1Factory setting (may vary according to model)

2Depending on the appliance specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBS573BB0B Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info