Bedienungsanleitung Bosch HGD745257N (Seite 17 von 64) (Englisch, Holländisch)

677783

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Viewing the time settings

If several time functions are programmed, the corresponding

symbols light up on the display panel. The symbol for the time

function in the foreground is in brackets.

To view the timer

U, the cooking time r, the end time p or

the actual time

0, press the 0 sensor repeatedly until the

brackets are around the required symbol. The corresponding

value will be shown for a few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, a

flashing

0 symbol and four zeros are shown on the display

panel. Set the time.

1. Press the 0 button.

The display panel displays the time

‚ƒ.‹‹.

2. Set the time with the buttons @ or A.

The programmed time is displayed after a few seconds.

Changing the time

No other time function can be programmed.

1. Press the 0 button four times.

The time symbols light up on the display panel, the brackets

are located next to

2. Adjust the time with the buttons @ or A.

The programmed time is displayed after a few seconds.

Hiding the clock

You can hide the clock. For more information, please refer to

the section Changing the basic settings.

Childproof lock

The oven includes a childproof lock to prevent it being turned

on accidentally.

The oven does not react to any setting. The timer and time can

be programmed when the childproof lock is on.

When the heating type and temperature or grill level are

programmed, the childproof lock turns off the heating.

Activating the childproof lock

No cooking time or end time should already be set.

Press the

D button for approximately four seconds.

The display panel shows the symbol

D. The childproof lock is

now activated.

Turning off the childproof lock

Press the

D button for approximately four seconds.

The

D symbol in the display panel goes off. The childproof

lock is now deactivated.

Changing the basic settings

This oven has different basic settings. The settings can be

adapted to the user's own needs.

No other time function can be programmed.

1. Press the 0 button for approximately 4 seconds.

The display panel will show the current basic setting for the

time, e.g.

™‚ for the Selection ‚.

2. Set the basic setting using the buttons @ or A.

3. Confirm with the 0 button.

The display panel shows the following basic setting. Using

the button

0 select the levels and using the buttons @ or A

make the setting.

4. Press the 0 button for approximately 4 seconds.

All basic settings have been applied.

The basic settings can be changed again at any time.

Basic settings

Selection

‚ Selectionƒ

Selection

„

™‚

Time indicator always* only with

the

button

™ƒ

Duration of signal

after the cooking

time or the time set

on the timer has

elapsed

approx.

10 sec

approx.

2 min.*

approx.

5 min

™„

Time until a setting is

applied

approx.

2 sec

approx.

5 sec.*

approx.

10 sec.

* Default setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HGD745257N Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info