Bedienungsanleitung Bosch HMT85DR53 (Seite 14 von 24) (Englisch)

448717

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Cleaning sponge

The enclosed cleaning sponge is very absorbent. Use the

cleaning sponge only for cleaning the cooking compartment

and for removing residual water from the evaporator dish.

Wash the cleaning sponge thoroughly before using for the first

time. You can wash the cleaning sponge in the washing

machine (hot wash).

Microfibre cloth

The honeycomb microfibre cloth is particularly suitable for

cleaning sensitive surfaces such as glass, glass ceramic,

stainless steel or aluminium (product no. 460 770, also

available from our online eShop). It removes liquid and greasy

deposits in one go.

Descaling

The appliance must be descaled at regular intervals in order for

it to continue operating correctly. The

Ê indicator reminds you

to do this.

You can only dispense with descaling completely if you

exclusively use softened water.

The descaling operation consists of:

■ Descale (approx. 30 minutes), then refill the water tank and

empty the evaporator dish

■ 1st rinse (30 seconds) and then empty the evaporator dish

■ 2nd rinse (30 seconds) and then remove the remaining water

All three steps must be completed in full. The appliance is

ready for operation again only after the 2nd rinse.

Descaler

Only use the liquid descaler recommended by the after-sales

service for descaling (product no. 311138, also available

online from the eShop). Other descalers may damage the

appliance.

1. Prepare a descaling solution by mixing 300 ml water and

60 ml liquid descaler.

2. Empty the water tank and fill with descaling solution.

3. Carefully slide in the water tank with the descaling solution

and close the appliance door.

Caution!

Risk of surface damage: If descaler comes into contact with the

front of the appliance or any other sensitive surfaces, wash it off

immediately with water.

Caution!

Damage to the appliance: If descaler is in the appliance for a

prolonged period, this may damage the water pump. Ensure

that the descaling and rinsing cycles take no longer than three

hours to complete.

Starting descaling

The cooking compartment must have cooled down completely.

1. Press the # button to switch on the appliance.

2. Press the r button.

The

Ë symbol (Fill water tank) appears. This is to remind you

to fill the water tank with the descaling solution (see section:

Descaler).

3. Press the n button.

1st rinse

A signal sounds after approx. 30 minutes. The

Ë symbol (Fill

water tank) and [

r] ‚:‹‹ min are displayed.

1. Rinse the water tank thoroughly, fill with water until the MIN

mark and reinsert.

The

É symbol (empty evaporator dish) appears.

2. Remove the descaling solution from the evaporator dish

using the cleaning sponge supplied.

3. Close the appliance door and press the n button.

The appliance starts rinsing.

2nd rinse

After a short time, the

É symbol appears again. [r] ‹:„‹ min

appears in the display.

1. Thoroughly rinse out the cleaning sponge.

2. Remove the remaining water from the evaporator dish using

the cleaning sponge.

3. Close the appliance door and press the n button.

The appliance starts rinsing.

Once descaling is complete,

‹‹:‹‹ and É appear in the

display.

4. Press the # button to finish descaling, and switch off the

appliance.

Removing the remaining water

Remove the remaining water from the evaporator dish using the

cleaning sponge. Wipe out the cooking compartment using the

cleaning sponge and then dry with a soft cloth.

Cancelling the descaling

Note: After cancelling the descaling, you must rinse the

appliance twice. The appliance is locked against other

applications until the second rinsing operation is complete.

Press and hold the

n button to cancel the descaling process.

To ensure that no descaling solution remains in the appliance,

it must be rinsed twice after a cancellation.

The

Ë symbol appears.

Now proceed as described in the “1st rinse“ section.

Troubleshooting

Malfunctions often have simple explanations. Please read the

following instructions before calling the after-sales service.

Repairs may only be carried out by fully trained after-sales

service technicians. Incorrect repairs to your appliance may

present considerable risks for the user.

: Risk of electric shock!

■ Work on the appliance electronics may only be performed by

a specialist.

■ Always disconnect the appliance from the power supply

when work is carried out on the electronics. Switch off the

circuit breaker or remove the fuse from your household fuse

box.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HMT85DR53 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HMT85DR53

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info