Bedienungsanleitung Bosch HRG6769S6B (Seite 21 von 64) (Englisch)

745967

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

en Steam

7. Put the cover ‚ back into the opening on the water

tank.

8. Insert the filled water tank (Fig. %). Ensure that the

water tank locks into place behind both holders ƒ

(Fig. &).

9. Slowly slide the control panel downwards and then

push it towards the rear until it is closed completely.

The water tank has been filled. You can start using

operating modes with steam.

Refilling the water tank

Notes

■Steam-assisted operations continue without adding

steam.

■If the water tank runs dry during the operation with

the Dough proving or Reheating settings, the

operation is interrupted. Fill the water tank.

1. Open the control panel.

2. Remove and refill the water tank.

3. Insert the filled water tank and close the control

panel.

After every steam operation

:Warning – Risk of scalding!

When you open the appliance door, hot steam can

escape. Steam may not be visible, depending on its

temperature. When opening, do not stand too close to

the appliance. Open the appliance door carefully. Keep

children away.

:Warning – Risk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

Caution!

Enamel damage: Do not start any operations when

there is water on the cooking compartment floor. Before

operation, wipe away the water from the cooking

compartment floor.

The remaining water is pumped back into the water

tank after every operation with steam. Then empty and

dry the water tank. Moisture remains in the cooking

compartment. To dry the cooking compartment, you

can either use the "Drying" operating mode or dry the

cooking compartment by hand.

Notes

■Once the appliance has been switched off, the v

field remains lit for a little longer to remind you to

empty the water tank.

■Remove limescale marks with a cloth soaked in

vinegar, then wipe with clean water and dry with a

soft cloth.

Emptying the water tank

Caution!

■Do not dry the water tank in the hot cooking

compartment. This will damage the water tank.

■Do not clean the water tank in the dishwasher. This

will damage the water tank.

1. Open the control panel.

2. Remove water tank.

3. Carefully remove the lid of the water tank.

4. Empty the water tank, clean it with detergent and

then rinse it thoroughly with clean water.

5. Dry all parts with a soft cloth.

6. Rub the seal on the lid until dry.

7. Leave to dry with the lid open.

8. Place the lid on the water tank and push it down.

9. Insert the water tank and close the control panel.

Cleaning the drip trough

1. Allow the appliance to cool down.

2. Open the appliance door.

3. Soak up the water in the drip trough ‚ with a sponge

cloth and wipe it carefully (figure !).

The drip trough ‚ is located below the cooking

compartment (figure ").



I

Time-setting options en

Starting drying

To dry the cooking compartment, it is heated up so that

the moisture in the cooking compartment evaporates.

You will then need to open the appliance door to allow

the steam to escape from the cooking compartment.

Caution!

Enamel damage: Do not start any operations when

there is water on the cooking compartment floor. Before

operation, wipe away the water from the cooking

compartment floor.

1. Leave the appliance to cool down.

2. Remove the worst dirt from the cooking

compartment immediately and wipe away moisture

from the cooking compartment floor.

3. If necessary, press the # On/Off button to switch on

the appliance.

4. Touch the Menu field.

The options for selecting an operating mode are

displayed.

5. Touch the "Cleaning" text field.

6. Touch the "Drying" text field.

The duration is displayed. It cannot be changed.

7. Press the l Start/Stop button to start.

The drying function starts and ends automatically

after 10 minutes.

8. Open the appliance door and leave it open for 1 to 2

minutes so that the moisture in the cooking

compartment can escape.

Drying the cooking compartment by hand

1. Allow the appliance to cool down.

2. Remove any food remnants from the walls of the

cooking compartment.

3. Dry the cooking compartment with a sponge.

4. Leave the appliance door open for 1 hour so that the

cooking compartment dries completely.

OTime-setting options

Ti me- s et t i ng opt i ons

Your appliance has different time-setting options.

You can call up the cooking time and the end time after

setting an operation using the touch-screen displays.

The timer has a separate field t and can be adjusted at

any time.

An audible signal sounds after a cooking time or timed

period has elapsed. You can cancel the audible signal

early by touching a field or touch-screen display.

Note: You can change how long the audible signal

sounds for in the basic settings. ~ "Basic settings"

on page 26

Setting the cooking time

You can set the cooking time for your dish on the

appliance. This means that the cooking time is not

unintentionally exceeded and you do not need to

interrupt other work in order to end the operation.

Applying settings

Depending on which direction you turn the rotary

selector first, the cooking time starts at a particular

default value: Left = 10 minutes, right = 30 minutes.

The cooking time can be set in one-minute increments

up to one hour, and then in five-minute increments.

The maximum setting is 23 hours and 59 minutes.

Example in the picture: It is 10:00, cooking time of 45

minutes.

1. Set the operating mode, and temperature or level.

2. Before starting the operation, touch the "Cooking

time" text field.

The cooking time is highlighted white in the display.

3. Turn the rotary selector to set the cooking time.

The end time is calculated automatically.

Time-setting option Use

qCooking time After the set cooking time has elapsed, the

appliance ends the operation automatically.

rEnd Enter a cooking time and the required end

time. The appliance starts automatically so

that the operation ends at the required time.

tTimer The timer functions like an egg timer. It runs

independently of the operation and the other

time-setting options. After the set time has

elapsed, the appliance does not switch on or

off automatically.







(QG

&RRNWLPH

&

7HPSHUDWXUH

+RWDLUHFR

7\SHRIKHDWLQJ

&RRNWLPH

Bosch HRG6769S6B Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info