Bedienungsanleitung Bosch HRG6769S6B (Seite 32 von 64) (Englisch)

745967

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

en Cleaning function

1. Touch the menu field.

The list of operating modes is displayed.

2. Touch the "Cleaning" text field.

3. Touch the "Pyrolytic self-cleaning" text field.

The cleaning setting is highlighted in white on the

display.

4. Turn the rotary selector to set the cleaning setting.

The end time is calculated automatically at the same

time.

5. Press the l Start/Stop button to start.

The cooking time counts down on the display. The

heating line does not appear for the cleaning

function.

The cleaning function starts.

Ventilate the kitchen when the cleaning function is

running.

The appliance door locks shortly after the function starts

running.A message and the n symbol appear on the

display.

When the cleaning function has ended, an audible

signal sounds. The cooking time 00 m 00 s is shown on

the display. Press the ÿ On/Off button to switch off the

appliance.

The appliance door cannot be reopened until the

n symbol for the locking mechanism goes out.

Setting a later end time

You can set a later end time. Before starting the

appliance, touch the "End" text field and set a later end

time using the rotary selector.

The appliance switches to standby after it is started. The

end time can no longer be changed.

Changing and cancelling

After starting the appliance, the cleaning setting can no

longer be changed.

If you would like to cancel the cleaning function, switch

the appliance off using the ÿ On/Off button. You can

no longer pause the operation using the l Start/Stop

button.

The appliance door remains locked until the n symbol

for the locking mechanism on the display goes out.

Once the cleaning function has ended

Once the cooking compartment has cooled down, use

a damp cloth to wipe off the ash that has been left

behind in the cooking compartment, in the accessories

on the racks and around the appliance door.

Wipe the pull-out rails with a damp cloth. Then slide the

pull-out rails in and out several times. After cleaning,

some discolouration may remain on the pull-out rails.

This has no effect on performance.

Note: Very bad soiling may cause white deposits to

remain on the enamel surfaces. This is residue from the

food and is harmless. It does not affect performance.

You can remove these residues using lemon juice if

required.

Descaling

To ensure that your appliance continues to operate

correctly, it must be descaled regularly.

Descaling comprises a number of different steps. For

hygiene reasons, the descaling programme must be

run through completely before the appliance is ready

for operation again. In total, the descaling programme

runs for approx. 70–95 minutes.

■Descale (approx. 55–70 minutes), then empty and

refill the water tank

■First rinsing cycle (approx. 9–12 minutes), then

empty and refill the water tank

■Second rinsing cycle (approx. 9–12 minutes), then

empty and dry the water tank

If descaling is interrupted (e.g. due to a power failure or

because the appliance is switched off), you will be

prompted to rinse the appliance twice when you switch

it back on. The appliance cannot be used until the

second rinsing cycle has finished.

The frequency with which the appliance must be

descaled depends on the hardness of the water used.

When only another five or fewer steam-assisted

operations are possible, the appliance reminds you to

descale it with a message on the display. The number

of remaining operations is displayed after the appliance

is switched on. You can therefore prepare for the

descaling in good time.

Starting

Caution!

■Risk of damage to the appliance: Only use liquid

descalers recommended by us for the descaling

programme. The time the product needs to work

during descaling depends on the type of descaler

used. Other descalers may damage the appliance.

Descaler order no. 311 680

■Descaling solution: Do not allow any descaling

solution or descaler to come into contact with the

control panel or other surfaces on the appliance.

This damages the surfaces. If this does happen,

remove the descaling solution immediately with

water.

If you have used a steam-assisted operation

immediately before descaling, you must first switch the

appliance off so that the residual water is pumped out

of the evaporator system.

1. Mix 400 ml water with 200 ml liquid descaler to

make a descaling solution.

2. Use the ÿ On/Off button to start.

3. Remove the water tank and fill it with descaling

solution.

4. Once the water tank has been filled with descaling

solution, push it back in again fully.

5. Close the control panel.

6. Touch the Menu field.

The list of operating modes is displayed.

7. Touch the "Cleaning" text field.

8. Touch the "Descaling" text field.

The duration of the descaling programme is

displayed. It cannot be changed.

9. Press the Start/Stop button l to start.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HRG6769S6B Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info