Bedienungsanleitung Bosch HRS538BS6B (Seite 25 von 40) (Englisch)

745983

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Shelf supports en

Note:Do not pour more than 150 ml of liquid into the

water tank throughout the descaling process.

1. Mixing a descaling solution:

– 50ml liquid descaler

– 100ml water

2. Pour the descaling solution into the water tank and

insert the water tank.

3. Use the function selector to set descaling ⁠.

4. Turn the temperature selector.

a appears in the display. Descaling starts after a

few seconds.

aAt the end of the descaling programme, ap-

pears in the display.

5. Remove the water tank and clean thoroughly with

water.

17.2 Second step ( ⁠ ⁠ ⁠)

1. Fill the water tank with 150ml water and insert it.

aAt the end of the rinse cycle, appears in the dis-

play.

2. Remove the water tank and clean thoroughly with

water.

17.3 Third step ( ⁠ ⁠ ⁠)

1. Fill the water tank with 150ml water and insert it.

aAt the end of the rinse cycle, appears in the dis-

play.

2. Remove the water tank and clean thoroughly with

water.

17.4 Fourth step ( ⁠ ⁠ ⁠)

1. Fill the water tank with 150ml water and insert it.

aAt the end of the rinse cycle, ⁠ ⁠: appears in the

display.

2. Remove the water tank and clean thoroughly with

water.

3. Dry the water tank and re-insert it.

aDescaling is complete and the appliance is ready

for use again.

17.5 Descaling interrupted

If descaling is interrupted (for example, due to a power

failure or because the appliance is switched off), the

symbol appears in the display after the appliance is

switched back on. You will be prompted to rinse three

times. The appliance cannot be used for other opera-

tions until the third rinse cycle comes to an end.

Note:If you set another operation, (Cleaning) ap-

pears in the display. Repeat the interrupted descaling

programme after rinsing.

1. Empty the water tank and clean thoroughly with wa-

ter.

2. Insert the empty water tank.

3. Use the function selector to set descaling ⁠.

4. Turn the temperature selector.

a appears in the display.

aAfter a few seconds, the appliance pumps the re-

maining liquid into the water tank.

5. Empty the water tank and clean thoroughly with wa-

ter.

6. To rinse the steam system, run the three rinse

cycles in the descaling programme.

→"Second step ( )", Page25

7. Restart descaling.

18 Shelf supports

To clean the rails and the cooking compartment, or to

replace the rails, you can remove these.

18.1 Detaching the shelf supports

WARNING‒Risk of burns!

The shelf supports get very hot

▶Never touch the shelf supports when hot.

▶Always allow the appliance to cool down.

▶Keep children at a safe distance.

1. Lift the rail forwards slightly and detach it ⁠.

2. Pull the whole rail to the front and remove it.

3. Clean the rail.

→"Cleaning products", Page22

18.2 Attaching the shelf supports

Notes

¡The rails only fit on the right or left.

¡For both rails, ensure that the curved rods are at the

front.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HRS538BS6B Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info