Bedienungsanleitung Bosch Intuvia BUI251 - 2017 (Seite 13 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

780243

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

English–2

Bosch eBike Systems 1 270 020 XBI | (19.4.17)

Assembly

Inserting and removing the battery pack

For inserting and removing the eBike battery pack in/from the

eBike, please read and observe the battery pack operating in-

structions.

Inserting and removing the on-board computer

(see figure A)

To insert the on-board computer 3, slide it from the front into

the holder 4.

To remove the on-board computer 3, press the lock latch 14

and slide the on-board computer toward the front out of the

holder 4.

Remove the on-board computer when you park the

eBike.

It is possible to secure the on-board computer against remov-

al in the holder. To do so, remove the holder 4 from the han-

dlebar. Put the on-board computer in the holder. Screw the

locking screw 15 (thread M3, 8 mm long) from below into the

thread provided in the holder. Mount the holder back onto the

handlebar.

Note: The locking screw is not designed to prevent theft.

Operation

Initial Operation

Requirements

The eBike system can only be activated when the following

requirements are met:

– A sufficiently charged battery pack is inserted (see battery

pack operating instructions).

– The on-board computer is properly inserted in the holder

(see “Inserting and removing the on-board computer”,

page English–2).

– The speed sensor is connected properly (see drive unit

operating instructions).

Switching the eBike System On/Off

Options for switching on the eBike system:

– If the on-board computer is already switched on when you

insert it into the holder, then the eBike system will be

switched on automatically.

– When the on-board computer and the eBike battery pack

are inserted, briefly press the On/Off button 5 of the on-

board computer.

– With the on-board computer inserted, push the On/Off

button on the eBike battery (bicycle manufacturer solu-

tions are possible whereby there is no access to the bat-

tery On/Off button; see the battery operating instruc-

tions).

The drive is activated as soon as you step on the pedals (ex-

cept for in the push assistance function or in assistance level

“OFF”). The motor output depends on the settings of the as-

sistance level on the on-board computer. As soon as the sys-

tem is activated, “Active Line/Performance Line” will ap-

pear briefly on the display.

As soon as you stop pedaling when in normal operation, or as

soon as you have reached a speed of 25/45 km/h, the assis-

tance from the eBike drive is switched off. The drive is auto-

matically re-activated as soon you start pedaling again and the

speed is below 25/45 km/h.

Options for switching off the eBike system:

– Press the On/Off button 5 of the on-board computer.

– Switch off the eBike battery using its On/Off button (bicy-

cle manufacturer-specific solutions are possible whereby

there is no access to the battery On/Off button; see the bi-

cycle manufacturer operating instructions).

– Remove the on-board computer out of its holder.

If the eBike is not moved and no button is pressed on the on-

board computer for 10 minutes, the eBike system will shut

down automatically in order to save energy.

eShift (optional)

eShift is the integration of electronic gear shifting systems in-

to the eBike system. The eShift components are electrically

connected to the drive unit by the manufacturer. The separate

operating instructions describe how to operate the electronic

gear-shifting systems.

Displays and configurations of the

on-board computer

Energy supply of the on-board computer

If the on-board computer is in the holder 4, a sufficiently

charged battery pack is inserted in the eBike and the eBike

system is turned on, then the on-board computer is powered

by the battery pack of the eBike.

If the on-board computer is removed from the holder 4, the

energy is supplied via an internal battery pack. If the internal

battery pack is weak when the on-board computer is switched

on, “Attach to bike” will appear in text indication d for 3 s.

The on-board computer will then turn off again.

To charge the internal battery pack, put the on-board comput-

er back in the holder 4 (when a battery pack is inserted in the

eBike). Switch the eBike battery pack on by its On/Off button

(see battery pack operating instructions).

You can also charge the on-board computer via the USB port.

Open the protective cap 8. Connect the USB port 7 of the on-

board computer via a suitable USB cable to a standard USB

charger or the USB port of a computer (5 V charging voltage,

max. 500 mA charging current). “USB connected” will ap-

pear in text indication d of the on-board computer.

OBJ_BUCH-2795-002.book Page 2 Wednesday, April 19, 2017 11:55 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Intuvia BUI251 - 2017 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info