Bedienungsanleitung Bosch Intuvia Performance Line (Seite 27 von 159) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

590283

Zoom out

Zoom in

Vorherige Seite

1/159

Nächste Seite

English–4

Bosch eBike Systems 0 276 001 SPI | (16.7.14)

Setting the Assistance Level

On the operating unit 10 you can set how much the eBike

drive assists you while pedalling. The assistance level can be

changed at any time, even while cycling.

Note: For individual versions, it is possible that the assistance

level is pre-set and cannot be changed. It is also possible that

less assistance levels are available for selection than listed

here.

The following assistance levels (max.) are available:

– “OFF”: The motor assistance is switched off, the eBike can

be operated as a normal bicycle through pedaling.

– “ECO”: Effective assistance at maximum efficiency for

maximum cruising range

– “TOUR”: Uniform assistance, for touring with long cruising

range

– “SPORT”: Powerful assistance for sportive riding off road

as well as for urban traffic

– “TURBO”: Maximum assistance, supporting highest ca-

dence for sportive riding

To increase the assistance level, press the “+” 13 button on

the operating unit until the desired assistance level appears in

the display b. To decrease the assistance level, press the

button“–” 12.

The requested motor output is displayed in indicator a. The

maximum motor output depends on the selected assistance

level.

When the on-board computer is removed from the holder 4,

the last indicated assistance level is stored; the motor-output

indicator a remains empty.

Switching the Push/Start Aid On/Off

With the speed version, the push aid can also be used as a

start aid. The start aid is switched off at 18 km/h.

The push/start aid can make it easier for you to push or start

the eBike. The speed of this feature depends on the selected

gear and depending on the model, can reach a maximum of

6 km/h or 18 km/h. The lower the selected gear, the lower the

speed of this function (at full capacity).

 The push/start aid function may only be used when

pushing or starting the eBike. If the wheels of the eBike

have no contact with the ground when using the push aid,

then there is risk of injury.

To switch on the push/start aid, press and hold the “WALK”

14 button on the operating unit. The eBike drive is switched on.

The push/start aid is switched off if one of the following

occurs:

–you release the “WALK” 14 button,

– the wheels of the eBike are blocked (e.g. by actuating the

brakes or impacting against an obstacle),

– the speed exceeds 6/18 km/h.

Switching bike lights on/off

In the model in which the lighting is powered by the eBike sys-

tem, the front and rear lights can

be switched on and off at the

same time via the on-board computer with button 2.

When the lighting is switched on “Light on” appears and

when the lighting is switched off “Light off” appears for ap-

prox. 1 s in text indication d. The lighting symbol c is dis-

played when the light is on.

Switching the bike light on and off has no effect on the back

lighting of the display.

Version Speed: Daytime running lights are always provided

in this option. When you switch on the eBike system (see

“Switching the eBike System On/Off”, page English–3), the

lights will also be switched on. The bike lights cannot be

switched off with button 2.

Speed and Distance Indication

The speed indication f always displays the current speed.

The following functions are available in the function indica-

tion (combination of text indication d and value indication e):

– “Clock”: Current time

– “Max. Speed”: Maximum speed achieved since the last

reset

– “Avg. Speed”: Average speed achieved since the last

reset

– “Trip time”: Trip time since the last reset

– “Range”: Estimated range of the available battery-pack

charge (for constant conditions such as assistance level,

route profile, etc.)

– “odometer”: Display of the total distance travelled with

the eBike (cannot be reset)

– “Distance”: Distance covered since the last reset

To switch between display functions, press button “i” 1 on

the on-board computer or button “i” 11 on the operating unit

repeatedly until the required function is displayed.

To reset “Distance”, “Trip time” and “Avg. Speed”, switch

to any of the three functions and then press and hold the

“RESET” button 6 until the indication is set to zero. This also

resets the values of the other two functions.

reset the “Max. Speed”,

switch to this function and then

press and hold the “RESET” button 6 until the indication is set

to zero.

To reset “Range”, switch to this function and then press the

“RESET” 6 button until the display is reset to the value of the

factory setting.

If the on-board computer is removed from the holder 4, all val-

ues of the features are saved and can still be displayed.

Assistance Level Assistance Factor*

(Derailleur)

“ECO”

50 %

“TOUR”

120 %

“SPORT”

190 %

“TURBO”

275 %

* The motor output can vary for individual versions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Intuvia Performance Line Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info