en
14
8. As soon as the refrigerator has been
found, enter the network name (SSID)
and the password (Key) of your own
home network (WLAN) into the
corresponding fields.
9. Confirm with the button Transmit to
domestic appliances.
■ If the connection is successful, on
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
■ If the display shows oF, it was not
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the
HomeConnect app
Once the connection between the
refrigerator and the home network has
been established, you can connect the
refrigerator to the app.
1. Press super button and lock/alarm off
button simultaneously to open the
HomeConnect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press
lock/alarm off button again until the
lock is deactivated.
2. Press °C button repeatedly until the
displays PA (pairing = connect with
app) and oF are shown.
3. Press + button to connect the
appliance with the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. Open the app and wait until the
refrigerator is displayed.
Use Add to confirm the connection
between the app and the refrigerator.
If the refrigerator is not automatically
displayed, click on Add appliance in
the app and follow the instructions. As
soon as your refrigerator is displayed,
add it with +.
5. Follow the instructions in the app until
the process is complete.
■ The displays show PA and on.
The refrigerator has been
successfully connected to the app.
■ If the connection has failed, please
check whether the mobile device is
connected to the home network
(WLAN).
Then connect the refrigerator to the
app again.
■ When the display shows Er, reset
the HomeConnect settings and
perform set-up again from the
beginning.
Verify signal strength
You should verify the signal strength if no
connection can be established.
1. Press the super button and the lock/
alarm off button simultaneously to
open the HomeConnect menu.
The display shows Cn.
