Bedienungsanleitung Bosch Kiox BUI330 (Seite 18 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

733030

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English – 2

1 270 020 XBK | (12.03.2019) Bosch eBike Systems

Technical data

On-board computer Kiox

Product code BUI330

Max. charging current of USB

port

mA 1000

USB port charging voltage V 5

USB charging cable

1 270 016 360

Operating temperature °C −5 to +40

Charging temperature °C 0 to +40

Storage temperature °C −10 to +50

Internal lithium-ion battery V

mAh

3.7

230

Protection rating

IP x7 (dustproof,

watertight)

Weight, approx. g 60

Bluetooth®Low Energy

– Frequency MHz 2400–2480

– Transmission power mW <10

A) At an ambient temperature of <25 °C

B) Not included as part of standard delivery

C) When the USB cover is closed

Declaration of Conformity

Robert Bosch GmbH, Bosch eBike Systems, hereby declares

that the Kiox radio communication unit complies with Dir-

ective 2014/53/EU. The full text of the EU Declaration of

Conformity can be accessed at the following Internet ad-

dress: https://www.ebike-connect.com/conformity

Fitting

Fitting and removing the on-board computer

(see figureA)

Fit the lower part of the Kiox into the holder(5) first and tilt

it forward gently until you can feel that the on-board com-

puter is firmly fixed in the magnetic holder.

To remove the on-board computer, hold it by the top end

and pull it towards you until it disengages from the magnetic

holder.

u Remove the on-board computer when you park the

eBike.

The on-board computer can be secured in place to prevent it

from being removed from the holder. To do this, loosen the

headset screw(16) until the Kiox holder can be swivelled

sideways. Put the on-board computer in the holder. Screw

the locking screw (M3 thread, 6mm long) from below into

the thread provided in the on-board computer (using a

longer screw may damage the on-board computer). Swivel

the holder back into place and tighten the headset screw in

accordance with the manufacturer's specifications.

Operation

Before initial commissioning

The Kiox is supplied with a partially charged battery. Before

using it for the first time, this battery must be charged for at

least one hour via the USB port (see "Power supply of the on-

board computer", pageEnglish–3) or via the eBike sys-

tem.

The control unit should be attached such that the buttons

are almost perpendicular to the handlebars.

When using the on-board computer for the first time, the lan-

guage selection page is displayed initially. You can then

choose to have essential functions and indications explained

via the <Intro to Kiox> menu item. The menu item can also

be called up at a later time via <Settings>→ <Informa-

tion>.

Selecting system settings

Fit the on-board computer in the holder and proceed as fol-

lows with the bicycle stationary:

Go to the status page (use the <button(10) on the control

unit to get to the first display) and call up the <Settings>

with the select button.

You can use the –(11) and +(12) buttons to select the set-

ting you want. You can open the settings, as well as any addi-

tional submenus, using the select button(9). You can use

the <button(10) to go back to the previous menu from any

settings menu.

The following settings can be changed in the <Sys set-

tings>:

– <Brightness>

– <Time>

– <Date [DD.Mon.YYYY]>

– <Time zone>

– <24h form (24h time format)>

– <Brgh backg. (Bright background)>

– <Imp. units (Imperial units)>

– <Language>

– <Factory reset>

Starting up the eBike system

Requirements

The eBike system can only be activated when the following

requirements are met:

– A sufficiently charged eBike battery is inserted (see oper-

ating instructions for the battery).

– The on-board computer is properly fitted to the holder.

Switching the eBike system on/off

The following options are available for switching on the

eBike system:

– Once the on-board computer and the eBike battery are

fitted, briefly press the on/off button(4) on the on-board

computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Kiox BUI330 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info