en
29
Controls
Fig. 2
Switching
the appliance on
Fig. 2
1. Switch on the appliance with the
On/Off button 1.
A warning signal sounds,
the temperature display 4 flashes
and the alarm button 5 is lit.
2. The warning signal is switched off
by pressing the alarm button 5.
The appliance begins to cool.
Light is switched on when the door
is open.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: -18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
■ The sides of the housing are
sometimes heated slightly.
This prevents condensation in
the area of the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
1 On/Off button
Serves to switch the whole
appliance on and off.
2 “Super” button
(freezer compartment)
Switches super freezing
on and off.
3 Temperature selection buttons
freezer compartment
These buttons set the
temperature in the freezer
compartment.
4 Temperature display freezer
compartment
The numbers correspond to
the set freezer compartment
temperatures in °C.
5 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
6 Holiday button
Is used to switch vacation mode
on and off (see chapter entitled
Vacation mode).
7 Temperature selection buttons
refrigerator compartment
These buttons set the
temperature in the refrigerator
compartment.
8 Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in °C.
9 “Super” button refrigerator
compartment
Switches super cooling on
and off.
