Bedienungsanleitung Bosch M 700 (Seite 27 von 356) (Alle Sprachen)

764286

Zoom out

Zoom in

Vorherige Seite

1/356

Nächste Seite

English | 27

Display

Symbol Meaning

➊Back button

➋Confirm button

If the confirm button is pressed whilst mow-

ing, the mower will return to the docking

station

➌○ Red LED on: mower error

➍○ Green LED on: mower is switched on

Green LED off: The mower is inactive and

your four-digit PIN code is required for ac-

tivation.

Or the mower is shut off, the isolator switch

must be turned on and your four digit PIN

code must be entered to activate the

mower.

Note: during a software update, the green

LED and red LED will be on.

➎Left/right button

➏Down/up button

➐Display with dialog screen

➑1 2 3Garden number (shown when more than

one garden map in the mower memory)

Only with Indego S+ 500 and M+ 700:

➒Network signal present

Network signal absent

The display switches into sleep mode, if no input is made for

10 minutes.

Adding a further Lawn Area (see

figure K)

To install the Indego to an additional lawn area, please follow

the instructions in the Installation Guide.

Separate lawn area with separate docking station (see

figure K, right side): The mowercan be used on up to three

different lawn areas. For an additional lawn area, a separate

docking station (see figure A) and the necessary perimeter

wire and pegs are required. If a schedule or the “Bosch

AUTO” calendar function or the Bosch ”SmartMowing”

functionality is set, the grass of the area it is in will be cut,

within the defined time slots.

Switch off the mower when transporting it between the indi-

vidual lawn areas.

Note: software updates have to be carried out on the mower

in every docking station.

To ensure remembering which docking station belongs to

which lawn area, it is recommended to label the docking sta-

tions with the lawn area number and description when stor-

ing them for winter.

Without separate docking station: It is possible to connect

the lawn areas by placing the perimeter wire between the

two lawn areas parallel to each other as close as possible

(see figure K, top left). The additional lawn area without

docking station is not recorded in the map memory and the

mower will not use the LogiCut cutting strategy in this lawn

area without the docking station. The maximum recommen-

ded lawn area without docking station is 45/50m2 (for In-

dego 500/700 models). The mower will mow until it runs

out of battery and will need to be carried back to the docking

station for charging.

Mowing

uDo not let children ride the mower.

uPress the stop button on top of the mower before lift-

ing. Always lift the mower by its handle. (see figureF)

Only with Indego S500 and M700: After successful install-

ation you can either immediately begin to mow by confirming

“Mow now” on the display, or wait for the next scheduled

cutting period, as programmed by the “Bosch AUTO” Calen-

dar Function (previous setting required).

A manual mowing schedule can also be set up according to

your specific needs.

Only with Indego S+500 and M+700: After successful in-

stallation, you can begin mowing immediately by confirming

“Mow now” on the display, or on the free Bosch Smart

Gardening App by pressing "mow”. You could also set up a

programmed schedule, using the Bosch "SmartMowing"

functionality, which can also plan future cutting sessions

based on when it is forecasted to rain. You could also set up

a programmed schedule in the calendar using the display or

the Bosch Smart Gardening App.

The mower must mow a lawn area 3 times completely (do 3

full cuts) to learn the lawn area. During the learning phase,

the visual result may not be optimal.

Approximate runtimes for complete lawn area coverage us-

ing LogiCut are listed below. Please note that the runtimes

will vary depending on the lawn complexity and number of

objects within the lawn area.

100m24h

500m216h

700m222h

Set a schedule with frequent repetitions. This achieves good

mowing results, the battery charge will last longer and you

avoid debris on the lawn.

When the mower is mowing

In “manual” mode, the mower works until the lawn is

mowed. Mowing is interrupted only for charging the battery.

Bosch Power Tools F 016 L94 038 | (11.11.2020)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch M 700 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info