Bedienungsanleitung Bosch m com 909s (Seite 18 von 25) (Englisch)

297128

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

PHONE SETUPPHONE SETUP

Note: If your phone has been without power

for more than 8 hours you should set the time and

date function again. Otherwise you may risk that

all functions using the time and date feature may

not be active.

Event auto delete

Your phone will automatically delete an event as

soon as it has occurred. However, a recurring

event will not be deleted in this way. You must

then enter the List menu system. If you don’t want

the event to be deleted automatically select

Event auto delete off

. In that case the

right function key text will be

when the

event occurs.

Factory settings

You can always return to the original setup of

your phone. The phone is set up by the manu-

facturer as follows:

Language: Automatic

Dial setup: Autoredial off

Speed dialling on

Any key answer off

Incoming call setup:

Next call type: Speech

All call type: Speech

Network: Automatic

Power saving: Display on

Backlight on

Car kit: Auto answer off

Auto power off automatic

Greeting: Welcome

Time & date: Show time on

Show date on

Time format: 24 hours

Date format:

day, month, year

(dd.mm.yyyy)

Event auto delete: On

Preferred list

The list of networks on your SIM card defines the

order of preference in which your phone will se-

lect a network in automatic mode. Network ope-

rators offer different services and call charges;

therefore it may be beneficial for you to make a

preferred list of your own. Enter the individual

networks in your own order of preference and

store them on your SIM card. To do this, you must

access the Selection of net-work sub menu, select

the

Set preferred list

option and use to select

the empty location in which you want to store the

new network. Pressing

EDIT

will give you a list

of available net-works. Scroll through the list us-

ing . When you see a network you wish to

store in your preferred list, just press

. If you

select a currently used location and press

EDIT

the former occupant can be deleted when you en-

ter the new one. Just press

EXIT

to leave the list

as it was.

Once a network is stored in the preferred list, you

can always see the country and network code of

the actual network by pressing

EDIT

in the Set

preferred list option.

Power saving

To save your battery and thus increase both

conversation and standby times you can select

whether you want the display contents to be

visible or not in standby mode.

Select

Display remains on

if you want it

to be visible, and

Display switches off

if you want it not to be visible. The display will

switch off after 3 minutes in standby mode.

In standby mode the display and keypad backlight

will always switch off after 10 seconds if your tele-

phone is set to

Backlight on

. However, you

have the option of having the backlight switched

off permanently by selecting

Backlight off

Car kit installation

This option is only effective if the phone is con-

nected to a handsfree car kit. See page 41 for

more information.

Welcome greeting

You can change the welcome greeting of your

phone according to your own wishes. Delete the

old message by holding

CLEAR

, enter the new

greeting via the keypad and confirm by pressing

Time & date

The current time and date will be shown in the

standby display after 3 seconds if you have

selected these to be shown. To do so just select

Show time on and Show date on.

ou can set both time and date and any corrections

are made by using the arrow keys. moves the

cursor to the left. moves the cursor to the

right.

Entering the

Time format

option you can set

the clock to either 12 or 24 hours. In the option

Date format

you have the choice of speci-

fying the sequence in which you want the date to

be shown, e.g. date, month and year.

However, if one of the following symbols are

shown in the standby display, time and date will

not be visible:

Just press the left-hand function key briefly to

have time and date displayed for 5 seconds.

As long as the clock is active, all Outgoing,

Answered and Missed calls plus events will be

time/date stamped. The same applies for the

messages stored in your in- and outbox.

GSM 909 DUAL S GB 10/11/99 15:13 Side 34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch m com 909s Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info