745961
13
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Time-setting options en
13
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted on the display.
Use the button to reset the timer duration to zero.
aAfter a few seconds, the appliance applies the
change and goes out.
8.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirements
¡A type of heating and a temperature or setting are
set for the main oven ⁠.
¡Operation with the meat probe has not been set.
¡Operation with Sabbath mode has not been set.
1. Press the button repeatedly until the symbol for
the oven being switched on and the symbol are
highlighted.
2. Use the or button to set the cooking time.
Button Default value
10 minutes
30minutes
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
aThe appliance starts heating and the cooking time
counts down after a few seconds.
aIf the cooking time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
3. When the cooking time has elapsed:
Press any button to end the audible signal before
it sounds.
To set a cooking time again, press the button.
When your food is ready, switch off the appli-
ance.
Changing the cooking time
You can change the cooking time at any time.
Requirement: is highlighted on the display.
Change the cooking time using the or button.
aThe appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
Requirement: is highlighted on the display.
Reset the cooking time to zero using the button.
aAfter a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡Food will spoil if you leave it in the oven cavity too
long.
Requirements
¡A type of heating and a temperature or setting are
set for the main oven ⁠.
¡A cooking time is set.
¡Operation with the meat probe has not been set.
¡Operation with Sabbath mode has not been set.
1. Press the button repeatedly until the symbol for
the oven being switched on and the symbol are
highlighted.
2. Press the or button.
aThe display shows the calculated end time.
3. Use the or button to delay the end time.
aAfter a few seconds, the appliance applies the set-
ting and the display shows the set end time.
aOnce the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
aOnce the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
4. When the cooking time has elapsed:
Press any button to end the signal prematurely.
To set another cooking time, press the button.
When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement: is highlighted on the display.
Use the or button to delay the end time.
aThe appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
Requirement: is highlighted on the display.
Reset the end time to the current time plus the set
cooking time using the button.
aAfter a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
"Off" position ⁠.
1. Use the or button to set the time.
2. Press the button.
aThe time that is set appears on the display.
Tip:You can go to the basic settings →Page19 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:The function selector must be set to the
"Off" position ⁠.
1. Press the button repeatedly until is highlighted
in the display.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch MBA5785S6B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info