Bedienungsanleitung Bosch MC812B816 (Seite 24 von 260) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

765833

Zoom out

Zoom in

Vorherige Seite

1/260

Nächste Seite

en Blender

5. Place the juice centrifuge in the bowl.

6. Attach the lid of the juice centrifuge with

the pusher. Observe the marking (.)

when doing so.

7. Rotate the lid clockwise as far as

possible.

8. Insert the mains plug. Set the rotary

switch to the setting min.

Add fruit or vegetables to the filling

shaft and push down with the

pusher, applying light pressure. Cut

up beforehand if necessary. After

processing, briefly set the rotary switch

to the setting max and let the appliance

run until the pulp is fully squeezed out.

After processing, set the rotary switch to

P. Disconnect the mains plug.

Clean all parts immediately after use.

X “Cleaning and maintenance” see

page 26

Caution!

Empty the bowl in good time:

– after processing max. 500 g,

– before the juice reaches the grating

container.

Blender

For mixing liquid or semi-solid food,

for cutting / chopping raw fruit and

vegetables and for puréeing food.

Blender jug made of Tritan

Tritan is an unbreakable plastic with no

discernable taste or smell. Blender jugs

made of Tritan can be used to process ice

cubes and frozen food.

W Risk of injury

Never reach into the attached blender! Do

not remove / attach the blender until the

drive is at a standstill. Do not touch the

blades of the blade insert with bare hands.

W Risk of scalding!

When processing hot liquids, steam

escapes through the funnel in the lid. Add

a maximum of 0.4 litres of hot or frothing

liquid.

Caution!

Do not expose the blender jug to

temperatures above 80°C.

X Fig. I

1. Attach the blender. Observe the

marking (.) when doing so. Rotate the

blender clockwise as far as possible.

2. Add ingredients.

Processing quantities

Solid food For optimum

results 80 g

Liquids max. 1.5 l

Hot or frothing liquids max. 0.4 l

3. Attach the lid and rotate clockwise. The

lid lug must be fully inserted in the slot

of the blender handle.

Caution!

– Do not operate the blender when empty.

– The blender will not operate until the lid

is screwed on tight.

4. Insert the mains plug. Set the rotary

switch to the desired setting.

Adding more ingredients

5. To add more ingredients, set the rotary

switch to P. Remove the lid and add

ingredients, or

6. remove the funnel and gradually add

solid ingredients through the filling

opening.

7. Pour liquid ingredients through the

funnel.

After processing, set the rotary switch to

P. Disconnect the mains plug.

Clean all parts immediately after use.

X “Cleaning and maintenance” see

page 26

Tip: To preclean, pour a little water with

detergent into the attached blender. Switch

to setting M for several seconds. Discard

the water and rinse the blender with clean

water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MC812B816 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info