Bedienungsanleitung Bosch MFW2500 (Seite 19 von 210) (Alle Sprachen)

700776

Zoom out

Zoom in

Vorherige Seite

1/210

Nächste Seite

Shredding attachment

2. First fit the knife and then the required

perforated disc onto the worm gear.

Blades must face the perforated disc.

3. Fit the threaded ring onto the housing

and screw tight in a clockwise direction

without using force.

The meat mincer is now prepared.

Preparation for sausage filler

X Fig. C

1. Insert the worm gear with the agitator

paddle at the front in the housing.

2. First fit the bearing ring onto the worm

gear and then the sausage nozzle into

the housing.

3. Fit the threaded ring onto the housing

and screw tight in a clockwise direction

without using force.

The sausage filler is now prepared.

Preparation for kebbe maker

X Fig. D

1. Insert the worm gear with the agitator

paddle at the front in the housing.

2. First fit the conical ring onto the worm

gear and then the kebbe nozzle into the

housing.

3. Fit the threaded ring onto the housing

and screw tight in a clockwise direction

without using force.

The kebbe maker is now prepared.

Use

Note: The food is processed in different

ways depending on the application.

X

The following example describes use of

the base attachment as a meat mincer:

W Risk of injury!

– Do not reach into the feed chute with

your hands.

– Only use the pusher when adding more

food.

Caution!

– Do not process bones, gristle, sinews or

other solid components.

– Do not process frozen meat.

– Do not apply great force with the pusher.

X Sequence of figures E

1. Fit the prepared attachment onto the drive

of the base unit, holding it at an angle.

2. Turn the attachment anticlockwise until

you hear it click into position.

3. Fit the filling tray and insert the pusher

in the feed chute.

4. Prepare your food. Chop up large parts

beforehand so they fit into the feed

chute without having to press them in.

5. Place a suitable container under the

attachment. Add the prepared food to

the filling tray.

6. Connect the mains plug. Switch on the

appliance.

7. Use the pusher to slide the food down

the feed chute, applying light pressure.

8. Once you have finished, switch off the

appliance and pull out the mains plug.

9. Remove the filling tray and pusher.

10. Hold down the release button and turn the

attachment clockwise until it disengages.

11. Remove the attachment, take it apart

and clean all parts. X



Shredding attachment

For shredding, grating and slicing items

such as cheese, fruit, vegetables, nuts,

almonds, dried bread rolls and other hard

foodstuffs. Not suitable for cutting up

fibrous foods such as celery or leek. Select

the appropriate insert depending on the

type and consistency of the food to be

processed. X

Preparation

W Risk of injury!

Do not reach into the sharp blades and

edges of the shredding, grating and slicing

inserts.

X Fig. F

 Fit the required insert into the housing.

Note: The insert is automatically locked

when the appliance is switched on.

The shredding attachment is now prepared.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MFW2500 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info