Bedienungsanleitung Bosch MFW2520W (Seite 15 von 169) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

765448

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

Predetermined breaking point

Predetermined

breaking point

To prevent serious damage to your

appliance if the mincer is overloaded, the

driver has a notch (predetermined breaking

point). If an overload occurs, the driver

breaks instead. However, the driver can

easily be replaced.

Otherwise spare parts with a predetermined

breaking point are not a component of our

warranty obligations.

Such spare parts can be purchased from

customer service (order no. 753348).

Operation

W Risk of injury!

Do not insert mains plug until all

preparations for working with the appliance

are complete.

Before operating the appliance

and accessories for the first time,

clean thoroughly; see “Cleaning and

servicing”.

X Fig. B

Stow perforated discs in the storage

compartment.

Stow individual parts of the sausage

filler attachment and kebbe attachment

in the pusher and close the pusher with

the lid.

Assembling the mincer

attachment

X Fig. C

Take perforated disc with required

hole diameter out of the storage

compartment.

Insert worm gear into the housing.

Put blade on the worm gear. Blades

must face the perforated disc.

Put perforated disc with the required

hole diameter on the worm gear.

Recess on the perforated disc must

be situated on the lug in the housing.

Screw on threaded ring clockwise. Do

not tighten the threaded ring too tight.

Disassembly is in reverse order.

Use for:

– processing raw or cooked meat, bacon,

poultry and fish.

– Do not process bones!

– Process steak tartare through the

mincer twice.

Assembling sausage filler

attachment

Note: The parts of the mincer attachment

(without perforated disc and blade) are

used.

X Fig. D

Take nozzle (A) and bearing ring (D) out

of the pusher.

Insert worm gear into the housing.

Insert nozzle into the threaded ring.

Put bearing ring on the worm gear and

hold in place. Recess on the bearing

ring must be situated on the lug in

the housing.

Screw on threaded ring with nozzle

clockwise. Do not tighten the threaded

ring too tight.

Disassembly is in reverse order.

Use for:

Filling artificial and natural casings with

sausage meat.

Assembling kebbe attachment

Note: The parts of the mincer attachment

(without perforated disc and blade) are

used.

X Fig. E

Take shaper (B) and conical ring (C) out

of the pusher.

Insert worm gear into the housing.

Insert shaper into threaded ring.

Put conical ring on the worm gear and

hold in place. Recess on the conical

ring must be situated on the lug in

the housing.

Screw on threaded ring with shaper

clockwise. Do not tighten the threaded

ring too tight.

Disassembly is in reverse order.

Use for:

Shaping dough tubes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MFW2520W Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info