Bedienungsanleitung Bosch MUMP5000 (Seite 25 von 252) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

770892

Zoom out

Zoom in

Vorherige Seite

1/252

Nächste Seite

Operation

Warning!

Do not twist the cord when inserting it. If the

appliance features an automatic cord winder,

do not insert the cord manually. If the cord

jams, pull out the cord all the way and then

allow it to wind up.

Insert the mains plug.

Bowl and tools

W Risk of injury from the rotating tools!

While the appliance is operating, never place

fingers in the mixing bowl. Attach the cover

(12) before operating the appliance!

Do not change tools until the drive has

come to a standstill – when the appliance

is switched off, the drive continues running

briefly and stops in the tool change position.

Do not move the swivel arm until the tool has

come to a standstill.

Always secure unused drives with protective

drive covers.

Attention!

Use bowl with this appliance only.

Stirrer (13)

for stirring dough, e.g. cake mixture

Whisk (14)

for whisking egg whites, cream and

light dough, e.g. sponge mixture

Kneading hook (15)

for kneading heavy dough and

mixingin ingredients that ought not

be cut (e.g. raisins and chocolate

chips)

Working with the bowl and the tools

Fig. E:

Press the Release button and

move the swivel arm to position 2.

Insert the bowl:

Tilt the bowl forwards and then set

it down. Turn anti-clockwise until it locks

into place.

Depending on the processing task, insert

the stirrer, whisk or kneading hook until it

locks into position.

Note:

If using the kneading hook, rotate the dough

deflector until the kneading hook can lock

into position (Fig. E-4b).

Put the ingredients to be processed into

the bowl.

Press the Release button and

move the swivel arm to position 1.

Attach the cover.

Set the rotary switch to the desired

setting.

Our recommendation:

– Stirrer:

first stir in at setting 1 (1), then select

setting 7 (4)

– Whisk:

setting 7 (4), mix in at setting 1 (1)

– Kneading hook:

first stir in at setting 1 (1), knead at

setting 3 (2)

Adding more ingredients

Switch off the appliance with the rotary

switch.

Add more ingredients through the feed

tube in the cover.

Remove lid.

Press the Release button and

move the swivel arm to position 2.

Add ingredients.

After using the appliance

Switch off the appliance with the rotary

switch.

Remove mains plug.

Remove lid.

Press the Release button and

move the swivel arm to position 2.

Take the tool out of the drive.

Remove the bowl.

Clean all parts, see “Cleaning and

servicing”.

Continuous-feed shredder

W Risk of injury!

Do not grip the sharp blades or edges of the

cutting discs. Take hold of cutting discs by

the edge only. Before attaching / removing

the continuousfeed shredder, wait until the

drive has come to a standstill and pull out the

mains plug. Do not reach into the feed tube.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUMP5000 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info