Bedienungsanleitung Bosch MUMXL20C (Seite 21 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

526411

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Robert Bosch Hausgeräte GmbH 21

Operation

Warning!

Do not operate the appliance without an

accessory/tool in the operating position.

Do not operate the appliance empty.

Do not expose appliance or accessories to

heat sources. Parts are not microwave-safe.

 Before operating the appliance and

accessories for the first time, clean

thoroughly; see “Cleaning and servicing”.

Preparation

 Place the base unit on a smooth, clean

surface.

 Prepare cable (Fig. ).

a) Appliances with cord store:

Pull out cable to the required length.

b) Appliances with automatic cord winder:

Pull out the cord in one go to the required

length (max. 100 cm) and slowly release;

the cord is locked.

Reducing the cord length:

Pull gently on the cord and allow

it to roll up to the required length.

Then gently pull the cord again and

slowly release; the cable is locked.

Warning!

Do not twist the cord when inserting it.

If the appliance features an automatic cord

winder, do not insert the cord manually.

If the cord jams, pull out the cord all the way

and then allow it to wind up.

Bowl and tools

Warning!

Use bowl with this appliance only.

“Absolute”

stirrer (13)

for stirring dough, e.g. sponge mixture

or mousse, and for folding in beaten

egg whites or cream.

Solid metal whisk (14)

for whisking egg whites, cream and

light dough, e.g. sponge mixture.

Kneading hook „High performance“

with dough deflector (15)

for kneading heavy dough and for

folding in ingredients which are not

to be cut (e.g. raisins, chocolate chips).

Important information con-

cerning the use of the whisk Fig. 

The whisk should almost touch the bottom

of the bowl to ensure that the ingredients

are optimally mixed. If processing very

small amounts, the whisk should just touch

the bottom of the bowl. For large amounts

the whisk can be positioned higher.

Adjust the height of the whisk as follows:

 Remove mains plug.

 Press release button and move multi-

function arm to position 1.

 Insert the whisk into the drive until the

whisk locks into position.

 Hold whisk in place and loosen nut clock-

wise using enclosed key (on the base

of the appliance).

Position Drive

Tool/

Accessory

Operating

speed

35 3–7

45 3

–5

58 5

–7

66 5

–7

Risk of injury!

Do not insert mains plug until all prepara-

tions for working with the appliance are

complete.

Risk of injury from rotating tools

While the appliance is operating, never

place fingers in the mixing bowl.

Attach the cover (12) before operating

the appliance!

Keep hands clear of rotating parts.

Do not change tools until the drive has

come to a standstill – when the appliance

is switched off, the drive continues running

briefly and stops in the tool change

position. Do not move multi-function

arm until the tool is at a standstill.

For safety reasons the appliance cannot

be operated in Pos. 2–4 until the bowl has

been inserted and turned all the way or the

tool drive cover (7) has been attached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUMXL20C Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info