Bedienungsanleitung Bosch MUZ9CC1 (Seite 14 von 104) (Alle Sprachen)

773050

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

en Preparation

– Do not process frozen food.

– The length of the cubes can be influenced

by increasing or reducing the pressure on

the pusher when pushing down.

Recommended speeds

1e.g. boiled potatoes, carrots

and eggs, cucumbers, bananas,

strawberries, melons

3e.g. raw potatoes and carrots,

soft sausage (e.g. mortadella),

hard cheese, peppers, tomatoes,

onions, apples, kiwifruit

Caution!

– If these guidelines are not observed,

the dicer, including the cutting grid and

the rotating blade, may be damaged.

– If the dicer is not used as intended, is

modified or is used improperly, Robert

Bosch Hausgeräte GmbH cannot

assume liability for any resulting

damage. Also excluded is the liability

for damage (e.g. blunt or deformed

blades) which result from processing

unapproved food.

Preparation

W Risk of injury

– Do not grasp the sharp cutter disc or

cutting grid. Take hold of the cutter disc

and cutting grid only by the edge!

– Before attaching or removing

the accessory, wait until the drive

has come to a standstill and pull out

the mains plug.

– The accessory must be completely

assembled before use.

– Never assemble the accessory on the

base unit.

– The accessory should only be used in

the intended operating position.

Caution!

The dicer insert may only be used with the

MUZ9VL1 continuous-feed shredder.

X Image sequence B

1. Insert the cutting grid into the base

holder as shown. Observe the recesses.

2. Fit the cutter disc with the blade guard

onto the base holder.

3. Press in the 4 catches until they

engage.

4. Insert the disc holder in the housing.

Both wings must be at the bottom.

5. Fit the dicer insert onto the disc

holder (,).

6. Remove the blade guard.

7. Fit the lid (,).

8. Rotate the lid in a clockwise direction as

far as possible (;).

Use

W Risk of injury

Never reach into the feed chute. Only use

the pusher provided when adding food.

Caution!

– Prevent the cut ingredients from building

up in the outlet opening.

– Do not apply great force with the pusher.

Important: Only prepare the base unit as

described in the main operating instructions.

The continuous-feed shredder can only

be operated if the bowl is fitted properly

(without lid).

X Image sequence C

1. Position the prepared continuous-feed

shredder on the front yellow drive as

shown.

2. Press down and rotate in a clockwise

direction as far as possible.

3. Plug the mains plug into the mains. Turn

the rotary switch to the recommended

speed.

4. Add the prepared food to the feed chute.

5. Only use the pusher provided to add

food.

6. When you have finished processing or

when the processed food in the bowl

almost reaches the outlet opening,

turn the rotary switch to y. Wait

until the drive comes to a standstill.

Disconnect the mains plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUZ9CC1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info